Table of Contents
Advertisement
If Cannot Change Device Name and Bundle Numbers
If the device name and bundle numbers cannot be changed, the IP address might not be
assigned properly. Moreover, IP addresses cannot be automatically re-assigned to the MY16-CII
cards that already have their own IP addresses. If you want to assign IP addresses manually,
follow the procedure below.
1.
Right click on a Tx or Rx block on the border of the Matrix View window to open the pop-
up menu shown below.
2.
Select "Device Properties" to open the "Device properties" window.
3.
Right-click the IP address, and select "Get Free IP" from the pop-up menu to assign a
tentative IP address.
4.
Right-click the IP address, select "Assign if static IP" (Assign as static IP address which is
retained even after the power is turned off) or "Assign if current IP" (Assign as temporary
IP address), then enter the desired IP address.
5.
Click [Store] to apply and save the new IP address.
CobraNet Manager Lite for Yamaha Owner's Manual
Figure 13: Matrix View Pop-up Menu
Figure 14: "Device Properties" Window
15
Advertisement
Table of Contents
