HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 114

1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
Procedure Procedure
1. Position the system board over te alignment tabs on the chassis.
2. Install the system board (callout 1), and then secure the board with the screws (callout 2).
3. Open the processor load plate:
a. Push the processor locking lever down to unclip, and then lift it upwards (callout 1).
b. Open the processor load plate (callout 2).
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 114