Dome Ptz (Only For Some Models) - D-Link DCS-F Series User Manual

Configure the Device
Parameter
Audio output
Volume
Step 2 Click Apply.
The message "Apply success!" is displayed. And the system saves the settings.
----End

Dome PTZ (Only for Some Models)

Description
The high speed dome cameras are connected to 485 keyboards, users can use the keyboard to control the
cameras' PTZ menu.
Procedure
Step 1 Choose Configuration > Device > Dome PTZ.
The Dome PTZ page is displayed, as shown in Figure 4-12.
Step 2 Input the PTZ address, the default is 1.
Step 3 Click Apply.
The message "Apply success!" is displayed. And the system saves the settings.
----End
Issue V1.0 (2023-02-10)
Description
Allows you to adjust the audio
output volume.
Dome PTZ Page
Camera User Manual
Setting
[Setting method]
Slide the slider left or right.
[Default value]
50
NOTE
The value ranges from 0 to 100.
62