• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. • For more information about the wallmount or rubber-foot, see pages 28~30.
02 PRODUCT OVERVIEW Top Panel of the Soundbar HW-Q930D / HW-Q800D HW-Q700D (Multi Function) Button (HW-Q930D / HW-Q800D models) • In standby mode, press the (Multi Function) button to turn on the Soundbar. • Press the (Multi Function) button to change the input source.
SERVICE DIGITAL AUDIO IN (OPTICAL) SERVICE SERVICE HDMI IN 1 HDMI DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) HDMI IN 2 HDMI IN 1 HDMI IN 1 HDMI HDMI HDMI TO TV (eARC/ARC) HDMI IN 2 HDMI IN 2 HDMI TO TV HDMI TO TV Bottom Panel of the Soundbar...
03 USING THE SOUNDBAR REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. How to Use the Remote Control Turns the Soundbar on and off.
Press the indicated areas to select Up/Down/Left/Right. Press Up/Down/Left/Right on the button to select or set functions. • Music Skip Up/Down/Left/Right Press the Right button to select the next music file. Press the Left button to select the previous music file. •...
0~300 milliseconds by using the Up/Down buttons. • Sync is only supported for some functions. • Available Surround speaker mode settings are supported only by HW-Q930D model. • The Virtual Speaker function can be turned ON/OFF by using the Up/Down buttons.
• Set the TV speaker to External Speaker to use this function. • Manufacturers supporting this function: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
04 CONNECTING THE SOUNDBAR Connecting the power and units Use the Power cord to connect the Subwoofer, Surround Speakers, and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Soundbar Main Unit) 1.
150° Surround Speaker L Surround Speaker R Surround speaker mode (HW-Q930D only) An optimal surround sound may be delivered depending on the position of the surround speaker. See the illustration below for speaker positioning. To activate this mode, select the Surround Speaker mode using the remote control of the Soundbar.
Manually connecting the Subwoofer or Surround Speakers Before performing the manual connection procedure below: • Check whether the power cables for the Soundbar and Subwoofer or Surround Speakers are connected properly. • Make sure that the Soundbar is turned off. 1.
Connect again. See the instructions for manual (applicable models only) Connection failed connection on page 13. Subwoofer Red and blue See the contact information for the Samsung Service Blinking Malfunction Surround Speakers Center in this manual. (applicable models only) Red and blue NOTE •...
• When connecting a TV that supports the eARC function, “TV eARC” appears on the display and the sound is heard. • To connect with eARC, the eARC function in the TV menu should be set to On. Refer to the TV user manual for details on setting. (e.g. Samsung TV : Home ( ) → Menu → Settings ( ) →...
Optical Cable (not supplied) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar <HW-Q930D / HW-Q800D> D.IN Top of the Soundbar <HW-Q700D> D.IN 1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar and the OPTICAL output port on the TV with an optical cable (not supplied), as shown in the figure.
3. Select “Soundbar Q-Series” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the Samsung TV to the Soundbar, select the message, and then establish a connection.
Page 18
What is the difference between BT READY and BT PAIRING? • BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before. • BT PAIRING : In this mode, you can connect a new device to the Soundbar.
) → Sound → Sound Output → Soundbar Q-Series (Wi-Fi) NOTE • The Wi-Fi Dolby Atmos connection is available in some Samsung TVs and some Soundbar models. • Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi.
Using the Q-Symphony Function • When the Soundbar connects to a Samsung TV that supports the Q-Symphony function you can play the sound simultaneously through the Soundbar and the TV. If you use the Q-Symphony function, the surround sound played on the TV allows you to enjoy a richer, more three- dimensional surround sound effect.
“OFF” appears on the display. • This is available in all Sound modes. Method 2. Connecting via TV To enable this function, turn on the Adaptive Sound+ mode on your Samsung TV menu. (Home ( ) → Menu → Settings ( ) →...
Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
Method 2. Connecting using an Optical Cable Top of the Soundbar <HW-Q700D> D.IN Top of the Soundbar <HW-Q930D / HW-Q800D> BD / DVD player / Set- top box / Game console D.IN DIGITAL AUDIO IN (OPTICAL) Optical Cable OPTICAL OUT...
What is the difference between BT READY and BT PAIRING? • BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before. • BT PAIRING : In this mode, you can connect a new device to the Soundbar.
Page 25
Notes on Bluetooth connection • Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication. • If asked for a PIN code when connecting a Bluetooth device, enter <0000>. • The Soundbar automatically turns off after 18 minutes in the Ready state. •...
• To enable this, connect at least two audio devices to the same Wi-Fi network at 5 GHz. • This is available on Samsung Sound devices that support Wi-Fi released year 2024 or later. • This feature does not support TV sound.
• This Samsung Soundbar supports AirPlay® and recommends that the user use the latest version of iOS, iPadOS, or macOS. • To enable AirPlay in your Soundbar, you must first register the device with the Samsung Smart Things app by agreeing with the app’s terms and conditions.
08 INSTALLING THE WALL 2. Align the Wall Mount Guide’s Center Line with the center of your TV (if you are mounting the Soundbar below your TV), and then fix MOUNT the Wall Mount Guide to the wall using tape. •...
Wall Mount Brackets and the speakers on the wall. • Samsung Electronics is not liable for any damage to the product due to the product being installed inappropriately. • Take care not to install the speakers sideways or upside down.
• This function is not supported by HW-Q700D model. • For the best performance of the microphones, keep the Soundbar Samsung may offer updates for the Soundbar’s system firmware in at least 2 cm away from the TV’s panel. the future.
• When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device. • For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) → Menu → Settings ( ) →...
Page 32
• If your wireless router is new, you will need to reconfigure the • Your device is unable to play the input signal. Change the TV’s speaker’s network settings. (See page 26.) audio output to PCM or Dolby Digital. (For a Samsung TV: • Soundbar does not support Wi-Fi 6. Home ( ) →...
Page 35
‒ Disposition recommandée pour les haut-parleurs ....12 ‒ Mode Haut-parleurs ambiophoniques (HW-Q930D uniquement) . . 12 ‒ Connexion manuelle du caisson de basses ou des haut-parleurs ambiophoniques .
Soundbar • Pour acheter des composants supplémentaires ou des câbles en option, contactez un centre de service Samsung ou le service clientèle Samsung. • Pour plus d’informations sur le support mural ou le pied en caoutchouc, voir les pages 28 à 30.
Permet de régler le volume. Arrêt microphone Marche microphone Bouton (Marche/Arrêt microphone) (modèles HW-Q930D / HW-Q800D) Appuyez sur le bouton pour activer ou désactiver le microphone. Lorsque le microphone est éteint, le voyant DEL s’allume en rouge. Voyant rouge Voyant rouge allumé...
SERVICE DIGITAL AUDIO IN (OPTICAL) SERVICE SERVICE HDMI IN 1 HDMI DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) HDMI IN 2 HDMI IN 1 HDMI IN 1 HDMI HDMI HDMI TO TV (eARC/ARC) HDMI IN 2 HDMI IN 2 HDMI TO TV HDMI TO TV Panneau inférieur du Soundbar...
03 UTILISATION DE LA TÉLÉCOMMANDE DU SOUNDBAR Insertion des piles avant d’utiliser la télécommande (2 piles AAA) Faites glisser le couvercle arrière dans le sens de la flèche jusqu’à ce qu’il soit complètement retiré. Insérez 2 piles AAA (1,5 V) orientées de sorte que leur polarité soit correcte. Refaites glisser le couvercle des piles à sa position initiale.
Appuyez aux endroits indiqués pour sélectionner haut/bas/gauche/droite. Appuyez en haut, en bas, à gauche et à droite du bouton pour sélectionner ou définir des fonctions. • Saut de musique Haut/Bas/Gauche/Droite Appuyez sur le bouton de Droite pour passer au fichier de musique suivant. Appuyez sur le bouton de Gauche pour passer au fichier de musique précédent.
• L’option Sync n’est prise en charge que pour certaines fonctions. • Les paramètres du Surround speaker mode ne sont pris en charge que par le modèle HW-Q930D. • La fonction de haut-parleur Virtual peut être réglée à ON/OFF à l’aide des boutons Haut/Bas.
Page 42
<HW-Q800D> Sortie Effet Entrée Avec caisson de basse et haut-parleur Avec le caisson de basses uniquement ambiophonique 2,0 canaux 2,1 canaux 2,1 canaux 5,1 canaux 5,1 canaux 5,1 canaux / 7,1 canaux (DTS) Standard 7,1 canaux 5,1 canaux 7,1 canaux Dolby Atmos®, DTS:X 5,1,2 canaux 7,1,4 canaux...
Chaque fois que vous appuyez sur le bouton WOOFER vers le haut et le maintenez enfoncé pendant 5 secondes, le mode change, dans l’ordre suivant : « OFF-TV REMOTE » (mode par défaut), « SAMSUNG-TV REMOTE », « ALL-TV REMOTE ».
04 CONNEXION DU SOUNDBAR Connexion de l’alimentation et des unités Utilisez le cordon d’alimentation pour brancher le caisson de basse, les haut-parleurs ambiophoniques et la Soundbar dans une prise électrique en respectant la séquence suivante : • Pour plus d’informations sur les exigences en matière d’alimentation électrique et de consommation d’énergie, reportez-vous à l’étiquette apposée sur le produit. (Étiquette : Arrière de l’unité...
150° Haut-parleur ambiophonique G Haut-parleur ambiophonique D Mode Haut-parleurs ambiophoniques (HW-Q930D uniquement) Un son ambiophonique optimal peut être obtenu, selon la position du haut-parleur ambiophonique. Voir l’illustration ci-dessous pour le positionnement des haut- parleurs. Pour activer ce mode, sélectionnez le mode Haut-parleurs ambiophoniques au moyen de la télécommande du Soundbar.
Connexion manuelle du caisson de basses ou des haut-parleurs ambiophoniques Avant d’effectuer la procédure de branchement manuel ci-dessous : • Vérifiez si les câbles d’alimentation du Soundbar et du caisson de basse ou des haut-parleurs ambiophoniques sont bien branchés. • Assurez-vous que le Soundbar est éteint. 1.
Page 47
Échec de la connexion (modèles applicables seulement) manuelle à la page 13. Rouge Caisson de basse Rouge et bleu Consultez les coordonnées du centre de service Samsung dans Clignotant Dysfonctionnement Haut-parleurs ambiophoniques ce manuel. (modèles applicables seulement) Rouge et bleu REMARQUE •...
• Pour la connexion à eARC, la fonction eARC dans le menu du téléviseur devrait être activée. Reportez-vous au manuel de l’utilisateur du téléviseur pour de plus amples renseignements sur ce réglage. (p. ex, Samsung TV : Accueil ( ) → Menu → Paramètres ( ) →...
Câble optique (non fourni) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Dessus du Soundbar <HW-Q930D / HW-Q800D> D.IN Dessus du Soundbar <HW-Q700D> D.IN 1. Le téléviseur et le Soundbar étant éteints, connectez le port DIGITAL AUDIO IN (OPTICAL) du Soundbar et le port de sortie OPTICAL du téléviseur à l’aide d’un câble optique (non fourni), comme indiqué...
Samsung au Soundbar, sélectionnez le message, puis établissez une connexion. • Lorsque le téléviseur Samsung est connecté, [Nom du téléviseur] → « BT » apparaît sur l'écran avant du Soundbar. 4. Vous pouvez maintenant entendre le son du téléviseur Samsung à partir du Soundbar.
Page 51
Quelle est la différence entre BT READY et BT PAIRING ? • BT READY : dans ce mode, vous pouvez reconnecter n’importe quel téléviseur ou appareil mobile Samsung connecté auparavant. • BT PAIRING : dans ce mode, vous pouvez connecter un nouvel appareil au Soundbar (Appuyez sur le bouton PAIR de la télécommande du Soundbar ou maintenez enfoncé...
) → Son → Sortie audio → Soundbar Q-Series (Wi-Fi) REMARQUE • La connexion Wi-Fi Dolby Atmos est disponible sur certains téléviseurs Samsung et sur certains modèles de Soundbar. • Précautions : Le Soundbar redémarrera automatiquement si vous activez/désactivez le Wi-Fi.
Utilisation de la fonction Q-Symphony • Lorsque le Soundbar se connecte à un téléviseur Samsung prenant en charge la fonction Q-Symphony, vous pouvez lire le son simultanément via le Soundbar et le téléviseur. Si vous utilisez la fonction Q-Symphony, le son ambiophonique émis par le téléviseur vous permet de profiter d’un effet de son tridimensionnel ambiophonique plus puissant et plus riche.
• Cette fonction est offerte par tous les modes audio. Méthode 2. Connexion par un téléviseur Pour activer cette fonction, activez le mode Adaptive Sound+ sur le menu de votre téléviseur Samsung. (Accueil ( ) → Menu → Paramètres ( ) →...
Ouvrez les options de sortie audio dans le menu des paramètres de votre lecteur Blu-ray ou d’un autre appareil et assurez-vous que « Pas d’encodage » est sélectionné pour Bitstream. Par exemple, sur un lecteur Blu-ray Samsung, accédez à Menu principal → Son → Sortie numérique, puis sélectionnez Bitstream (non traité).
Méthode 2. Connexion à l’aide d’un câble optique Dessus du Soundbar <HW-Q700D> D.IN Dessus du Soundbar <HW-Q930D / HW-Q800D> Lecteur BD/DVD/Décodeur/ Console de jeu D.IN DIGITAL AUDIO IN (OPTICAL) Câble optique OPTICAL OUT (non fourni) Dessous du Soundbar 1. Utilisez un câble optique (non fourni) pour connecter le port DIGITAL AUDIO IN (OPTICAL) au Soundbar principal et le port OPTICAL OUT à l’appareil externe.
Quelle est la différence entre BT READY et BT PAIRING ? • BT READY : dans ce mode, vous pouvez reconnecter n’importe quel téléviseur ou appareil mobile Samsung connecté auparavant. • BT PAIRING : dans ce mode, vous pouvez connecter un nouvel appareil au Soundbar (Appuyez sur le bouton PAIR de la télécommande du Soundbar ou maintenez enfoncé...
Page 58
Remarques sur la connexion Bluetooth • Placez un nouvel appareil à moins de 1 m (3,28 pi) pour vous connecter par Bluetooth. • Si un code PIN vous est demandé lors de la connexion d’un appareil Bluetooth, entrez <0000>. • Le Soundbar s’éteint automatiquement au bout de 18 minutes à l’état Ready (Prêt). •...
• Pour l’activer, connectez au moins deux appareils audio au même réseau Wi-Fi à 5 GHz. • Cette fonction est disponible sur les appareils de son Samsung prenant en charge le Wi-Fi commercialisés à partir de 2024. • Cette fonctionnalité ne prend pas en charge le son du téléviseur.
• Assurez-vous que le Soundbar est sous tension et qu’il est connecté au même réseau Wi-Fi que votre appareil Apple®. Avec AirPlay vous pouvez profiter de la musique, de balados et d’autres sons sur le Samsung Soundbar à partir de vos appareils Apple.
08 INSTALLATION DU SUPPORT 2. Alignez la ligne centrale du guide de montage mural du gabarit papier sur le centre de votre téléviseur (si vous montez le Soundbar sous ce dernier), MURAL puis fixez le guide de montage mural au mur avec du ruban adhésif. •...
• Samsung Electronics n’est pas responsable des dommages causés au produit suite à une installation défectueuse du produit. • Veillez à ne pas installer les haut-parleurs sur le côté ou à l’envers.
• L’illustration ci-dessous diffère du modèle respectif. • Cette fonctionnalité n’est pas prise en charge par le modèle HW-Q700D. Il se peut que Samsung propose des mises à jour du micrologiciel du système • Pour des performances optimales des microphones, gardez le Soundbar à...
• Lorsqu’un appareil externe (STB, appareil Bluetooth, appareil mobile, etc.) est connecté, réglez le volume de l’appareil externe. • Pour la sortie audio du téléviseur, sélectionnez Soundbar. (Téléviseur Samsung : Accueil ( ) → Menu → Paramètres ( ) → Tous les paramètres (...
Page 65
• Reconnectez l’appareil après avoir supprimé la liste des haut-parleurs instrument ou d’un appareil électrique pouvant provoquer des interférences Bluetooth sur l’appareil à connecter. (Téléviseur Samsung : Accueil ( radio. Placez le Soundbar loin des appareils susceptibles de provoquer des →...
Page 66
• Le logiciel Spotify est soumis à des licences tierces disponibles ici : https://www.spotify.com/connect/third-party-licenses. Being Roon Tested means that Samsung and Roon have collaborated to ensure you have the best experience using Roon software and Samsung equipment together, so you can just enjoy the music.