Table of Contents
Advertisement
Configuring the Terminal
Table 3-4. Datacomm Configuration Menu Fields (Continued)
The group ID for selecting may be any of the following ASCII
characters, the only limitation being that it must be a differ-
ent character than the one used for the group ID for polling
(see
PGr oup I D,
above):
SPACE !
#
S
%
&
I
() *+, -. /
o
through
9
: ; <
= )
? 8
A
through
Z [ /
]
A
a
through
z '
{ I
For compatibility with the HP 1000 and 3000 computers the
group ID for selecting should be limited to the following:
. (if
i
is the
PGroup I D)
_ (if
SPACE
is the
PGroup I D)
a through
z
(lowercase of
PGr oup I D
if
PGr oup I D
is
A
through
Z)
Default=a
SRRInvert
(Full Duplex
Hardwired
only)
FirstTerm
(Multipoint
only)
3-24
This field applies only when the
SRRXmi t
field is set to
eeYes".
When both the
SRRXmi t
and
SRRI nvert
fields are set to
eeYes",
the true state of the Secondary Receiver Ready (SRR)
(Secondary Carrier Detect (SCF) control line is detected as
the most negative voltage level instead of the most positive
voltage level.
Values:
Yes
No
Default=
No
If the terminal is the first one after an HP 30037A Asynchro-
nous Repeater or a modem or a modem bypass cable, if the
eeDM(CC)Xmi
t"
field is set to
eeYes",
or if the terminal is partofa
DSN data link, then this field must be set to
eeYe s".
Otherwise,
it should be set to
eeNo".
Values:
Yes
No
Default=
No
Advertisement
Table of Contents
