8.3.2
SFP993-1LD
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.3.3
SFP993-1LH
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
10GBASE-LR complying with IEEE 802.3
10 Gbps (10 Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
10 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
10GBASE-ER complying with IEEE 802.3
10 Gbps (10 Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
40 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
Technical data
8.3 SFP+ transceiver
-8.2 dBm
0.5 dBm
-12.6 dBm
0.5 dBm
-4.7 dBm
4 dBm
-14.1 dBm
0.5 dBm
45