Table of Contents
Advertisement
en-us_main.book.book Page 16 Wednesday, July 12, 2023 4:56 PM
16 OPERATION
List
Dust Emptying
(Replace Bag)
Indicator
a
Auto Emptying
Indicator
b
NOTE
• Remove all the protective plastic from the vacuum cleaner before use. Otherwise, it may cause abnormal
noise during the dust emptying operation.
Emptying the Vacuum's Dust Bin
Using the Auto Mode
When the automatic dust emptying mode is set,
the dust emptying operation starts automatically
whenever the vacuum cleaner is properly inserted
into the product.
When you purchase the product, the automatic
dust emptying mode is set by default.
1
Insert the vacuum cleaner into the product.
• After adjusting the length adjustment pipe
of the vacuum cleaner to the shortest
length, attach it to the product.
• If the vacuum cleaner pipe is connected to a
combination tool or a crevice tool, the
vacuum cleaner doesn't fit inside the
product. Use it without the combination
tool or the crevice tool.
• If the vacuum cleaner fits properly inside
the product, the alarm will sound. If the
alarm does not sound, reinsert the vacuum
cleaner, making sure that the nozzle sits flat
on the floor.
• Before starting the dust emptying
operation, pull the Kompressor level on the
• Indicates the dust emptying operation status or when to replace the
dust bag.
- White: Product is emptying dust.
- Flashing red: If the indicator flashes red while emptying dust, replace
the dust bag at the end of the dust emptying operation.
- Flashing red, beeping: If the dust emptying operation is complete and
the dust bag is full, the indicator will flash red, beep 10 times and
then turn off.
- If the indicator flashes red, replace the dust bag to maintain product
performance.
• Lights to indicate that the automatic dust emptying mode is on.
- Automatic dust emptying mode automatically starts to operate every
time the vacuum cleaner is mounted correctly onto the product.
- If you remove the vacuum cleaner and mount it immediately, dust
emptying operation may not start automatically, depending on the
circumstance. If it doesn't start automatically, select the Start/Stop
button to start.
2
Using the Manual Mode
1
Descriptions
vacuum cleaner down 2 or 3 times to sweep
away the dust to make the operation easier.
When the dust emptying operation is
complete, a melody sounds, the dust
emptying (replace bag) icon turns off, and the
vacuum cleaner starts charging.
Press Select Mode to change from the Auto
mode to the Manual mode.
Advertisement
Table of Contents
