Related Manuals for Siemens SR53HS52ME
Summary of Contents for Siemens SR53HS52ME
- Page 1 SR53HS52ME Dishwasher EN Instructions for use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations can be found online: Table of contents 1 Security ........4 8.2 Cake stand ........23 1.1 General information ....4 8.3 Lower dish rack .... 24 1.2 Intended 8.4 Folding spines........ 24 use ........... 4 8.5 Cutlery drawer.... - Page 3 14 Basic operation..35 21 Technical data ....55 21.1 Information on free and open 14.1 Switching on the device ....35 source software ..55 14.2 Setting the program ..... 35 14.3 Setting additional functions ..35 22 Declaration of Conformity ... 56 14.4 Setting the time delay ....
-
Page 4: Security
Security 1 Security Please note the following safety instructions. 1.1 General information ¡Read these instructions carefully. ¡Save the instructions and product information later use or subsequent ownership. ¡Do not connect the device if it is damaged during transport. 1.2 Intended use Use the device only: ¡to wash household dishes. - Page 5 Security WARNING - Risk of electric shock! Improper installations are dangerous. ▶ Only connect and operate the device in accordance with the information on the nameplate. ▶ Always use the power cable supplied with the new device. ▶ Only connect the device to an alternating current power supply via a properly installed earthed socket.
-
Page 6: Safe Use
Security Contact between the device and installation cables can lead to a defect in the installation cables, e.g. E.g., gas pipes and power lines. Gas from a corroded gas line can ignite. A damaged power line can lead to a short circuit. ▶... - Page 7 Security Strongly caustic-alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the washing compartment of the device can lead to explosions. ▶ Never use highly caustic-alkaline or highly acidic cleaning agents, especially from the commercial or industrial sector, in conjunction with aluminum parts (e.g.
-
Page 8: Damaged Device
Security ▶ Never bend, squeeze or change the power cable. 1.6 Damaged device WARNING - Risk of electric shock! A damaged device or a damaged power cable is dangerous. ▶ Never operate a damaged device. ▶ Never operate a device with a cracked or broken surface. ▶... - Page 9 Security Children can inhale or swallow small parts and thereby suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. Children can become trapped in the device and suffocate. ▶ If available, use parental controls. ▶...
-
Page 10: Avoid Material Damage
avoid Contact between the device and avoid 2 property damage water pipes may cause corrosion of avoid the water pipe and the water pipe may leak. Make sure there is at least 5 cm ▶ avoid 2.1 Safe Installation distance between the device and the water pipe. -
Page 11: Environmental Protection And Saving
Environmental protection and saving Special salt for dishwashers can 3.2 Save energy damage the washing container If you follow these instructions, your through corrosion. device will use less electricity and ▶ To ensure that overflowed special water. salt is rinsed out of the rinsing container, fill the special salt into the Use the Eco 50°... -
Page 12: Setting Up And Connecting
Setting up and connecting Make sure that the drain hose is not 4.2 Set up and connect the kinked, crushed or twisted. device You can install your under-counter Make sure that there is no cover in device or integrated device in the kitchen unit between wooden walls the drain that prevents the waste and plastic walls. - Page 13 Setting up and connecting ¡Please note that the water Safety system only works when there is power supply. Insert the cold appliance plug of the mains connection cable into the device. Plug the power plug of the device's power cord into a socket near the device.
-
Page 14: Getting To Know Each Other
Get to know 5 Getting to know each other 5.1 Device Here you will find an overview of the components of your device. type label Type plate with E number and FD number → Page 54 . You need the data for customer service → Page 54 . - Page 15 Get to know Fill the cleaner chamber with cleaner. Cleaner chamber → "Cleaner", page 30 Lower dish rack → Page 24 Lower dish rack Sieve system → Page 43 Sieve system Fill the special salt storage container with Storage container for special special salt.
-
Page 16: Controls
Get to know 5.2 Controls You can use the control panel to set all of your device's functions and receive information about its operating status. Some buttons allow you to perform various functions. 3 4 5 6 13 12 11 10 9 Switch on device →... - Page 17 Get to know If you approx. 3 seconds button Press to open the basic settings. → ""Change basic settings", page → "Remote Start", page 41 Remote start Set time delay → Page 35 Time delay Rinse aid refill indicator Rinse aid system →...
- Page 18 Get to know symbol Description bol in the display. → "Troubleshooting", page 46...
-
Page 19: Programs
programs 6 programs Here you will find an overview of the If the rinse aid system is switched on or if adjustable programs. Depending on there is a lack of rinse aid, the running time the device configuration, various changes. programs are available, which you You can find the consumption values can find on the control panel of your... -
Page 20: Information For Test Institutes
programs program Program Sequence Dishes: Time optimized: ¡delicate dishes, handling ¡Clean 45°C ¡ Speed 45° plug, temperature-sensitive Intermediate rinsing plastics and glasses ¡Rinse 55 °C Degree of pollution: ¡low-stick, fresh food leftovers Machine care Only use when the device has been 70°C cleared out. - Page 21 programs Tip:To reset the program to the factory pre-rinse program, use the Home Connect app or reset your device to factory settings. Depending on the device equipment...
-
Page 22: Additional Functions
Additional functions 7 additional functions Here you will find an overview of the additional functions that can be set. Depending on the device configuration, various additional functions are available, which you can find on the control panel of your device. Depending on the program, you can choose certain additional functions. -
Page 23: Upper Dish Rack
Furnishing Lower or raise the dish rack evenly 8.1 Upper dish rack to the appropriate level. Place cups, glasses and small dishes in the top rack. Make sure the dish rack is at the same height on both sides. To create space for larger dishes, you Release the levers. -
Page 24: Lower Dish Rack
Furnishing 8.3 Lower dish rack 8.4 Folding spines Put pots and plates in the lower dish Use the folding spikes to safely sort rack. dishes, e.g. B. Plates. You can place large plates up to a diameter of 31 cm in the lower dish To make it easier to organize pots, rack as shown. -
Page 25: Cutlery Drawer
8.5 Cutlery drawer Before the first Put cutlery in the cutlery drawer. 9.1 Carry out initial commissioning You must make settings when you first use it or after resetting to factory settings. Tip:Connect your device to a mobile device. You can easily adjust all settings using the Home Connect app. -
Page 26: Softening System
Softening system To get good washing results, you can 10 softening system soften water using the softening system and special salt. To avoid Hard, calcareous water leaves damage to the device, water with a limescale residue on the dishes and hardness above 7 °dH must be the washing container and can clog softened. -
Page 27: Special Salt
Softening system A notice:Only use special salt for 10.3 Special salt dishwashers. You can soften water with special Do not use salt tablets. Do not salt. use table salt. Pour the special salt into the storage Pour in special salt container. -
Page 28: Regenerating The Softening System
Rinse aid system ¡The water hardness level is 0 - 0.05 Additional consumption of electricity 6 °dH. You can do without special in kWh salt. The stated consumption values are press. laboratory measurements according To open the basic settings, to the currently valid standard and 3 seconds determined using the Eco 50°... -
Page 29: Setting The Amount Of Rinse Aid Added
Rinse aid system Fill in the rinse aid up to the max – A higher level adds more rinse mark. aid to the rinse cycle, reduces water stains and produces a better drying result. To save the settings, Press for 3 seconds. 11.3 Switch off the rinse aid system If the rinse aid refill indicator bothers... -
Page 30: Cleaners
cleanser Liquid cleaner 12 cleaners Liquid cleaners work faster and are recommended for shortened programs without pre-rinsing. 12.1 Suitable cleaners It can happen that filled liquid Only use cleaner that is suitable for cleaner comes out even though dishwashers. Both solo cleaners and the cleaner chamber is closed. -
Page 31: Unsuitable Cleaners
cleanser Add cial salt and rinse aid. For the For results, we recommend using best washing and drying results, we special salt for water hardness recommend using special salt and levels of 14 °dH and above. rinse aid for water hardness levels of 14 °dH and above. - Page 32 Dishes Pour cleaner into the dry cleaner Close the cleaner chamber lid. chamber. 50ml 25ml 15ml If you use tabs, one tablet is aThe lid clicks into place audibly. enough. Insert tabs horizontally. If The cleaner chamber opens you use powder cleaners or liquid Depending on the program, cleaners, follow the manufacturer's automatically at the optimal time...
-
Page 33: Tableware
Dishes 13.1 Damage to glass and Caused Recommendation dishes If you are strong Strong caustic alkaline ash or strong caustic alkaline Only wash glasses and porcelain that acidic rice or strongly acidic are marked as dishwasher-safe by the food, containing cleaning products manufacturer. -
Page 34: Clearing Out The Dishes
Dishes ¡For better washing results and – Do not place any small parts in To maintain drying results, place the tab collecting tray and do not parts with bulges and depressions block it with dishes so as not to at an angle to allow water to drain block the lid of the detergent away. -
Page 35: Basic Operation
service Press the button for the ▶ 4 basic operation appropriate additional function. → service "Additional functions", page 22 aThe additional function is set service and the additional function button flashes. 14.1 Switch on the device 14.4 Setting the time delay press. -
Page 36: Activate Key Lock
service aThe program is aborted 14.6 Activate key lock and is completed after approx. 1 The key lock prevents the device minute. from being used undesirably or improperly during operation. 14.10 Switch off the device The instructions for safe use → Page 10 observe. -
Page 37: Basic Settings
Basic settings 15 basic settings You can adjust the basic settings of your device to suit your needs. 15.1 Overview of the basic settings The basic settings depend on the features of your device. basic Description Display text Selection position H00 - H07 Adjust the softening system Water hardness... - Page 38 Basic settings basic Description Display text Selection position Hot water A00 - A01 Set cold water connection or hot water connection. Set the device only for hot water, if the hot water is processed economically and a suitable installation is available, e.g. B. a solar system with a circulation line.
-
Page 39: Changing Basic Settings
Basic settings basic Description Display text Selection position → "Remote Start", page Remote start rc0 - rc2 41 activate or deactivate. The following settings are possible: ¡With the setting "rc0" the function is permanently deactivated. ¡With the setting "rc1" The function can be selected using the button. -
Page 40: Home Connect
Home Connect 16.1 Home Connect quick start 6 Home Connect Connect T his device is network capable. Connect Connect your device to a mobile device Connect your device to a mobile device quickly and easily. to operate functions via the Home Connect app. -
Page 41: Remote Start
Home Connect Open the Home Connect app and 16.3 Data Protection scan the following QR code. Please note the information on data protection. When your device is connected to a home network connected to the Internet for the first time, your device transmits the following categories of data to the Home Connect Server... -
Page 42: Cleaning And Care
B. due to food approved machine care and machine residues and lime. To avoid cleaner for dishwashers online at malfunctions and reduce odors, clean https://www.siemens- the device at regular intervals. home.bshgroup.com/store or via customer service. Machine care, in conjunction with... -
Page 43: Sieve System
Cleaning and care phase distance from cleanser placement food residues Machine cleaner Cleaner chamber and deposits For optimal cleaning performance, the Remove any coarse dirt in the program doses the cleaners separately interior with a damp cloth. in the corresponding cleaning phase. This requires the correct placement of Clean the sieves. - Page 44 Cleaning and care Press the locking lugs together and coarse sieve remove the coarse sieve upwards. Clean sieves Impurities from the rinse water can clog the sieves. After each rinse, check the sieves for residue. Turn the coarse sieve counterclockwise and remove the sieve system.
-
Page 45: Cleaning The Spray Arms
Cleaning and care Pull the lower spray arm upwards. 17.6 Clean spray arms Limescale and impurities from the rinse water can block the nozzles and bearings of the spray arms. Clean the spray arms regularly. Unscrew the upper spray arms and pull them downwards. -
Page 46: Troubleshooting
This way you avoid unnecessary costs. Tip:Further information and explanations for troubleshooting can be found online by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com. WARNING Danger of electric shock! Improper repairs are dangerous. - Page 47 Troubleshooting Cause and troubleshooting Disturbance E:32-00 lights up Take the strainer out of the inlet hose Change or display for water supply shines. Clean the sieve. Place the strainer in the inlet hose. Screw on the water connection. 8th. Check the water connection for leaks. Connect the power supply.
- Page 48 Troubleshooting Cause and troubleshooting Disturbance E:61-03 lights up No device error. The siphon connection is still closed Change. Water will or the waste water hose is kinked or blocked. not pumped out. Check the connection on the siphon and open it if necessary.
- Page 49 Troubleshooting Cause and troubleshooting Disturbance All LEDs light up Electronics have detected an error. or flashing. Press the main switch button for about 4 seconds. The device will reset and restart. If the problem occurs again: Turn off the device. ‒...
- Page 50 Troubleshooting Cause and troubleshooting Disturbance Washing program selected that is too weak. Leftover food on dishes Choose a stronger washing program. dishes. ▶ → "Programs", page 19 Dishes have been pre-cleaned too much. The sensors determine a weak program flow. Stubborn dirt sometimes cannot be removed.
- Page 51 Troubleshooting Cause and troubleshooting Disturbance Cutlery is not sufficiently rust-resistant. Knife blades Traces of rust on surfaces plug. are often more severely affected. Use rust-resistant dishes. ▶ Cutlery also rusts if rusting parts are washed with it. Do not wash rusty parts. ▶...
-
Page 52: Cleaning The Waste Water Pump
Transport, storage and disposal Insert the pump cover and press 18.1 Clean the waste water 8th. down. pump Coarse food residue or foreign objects can block the wastewater pump. As soon as the flushing water no longer drains properly, you have to clean the waste water pump. -
Page 53: Making The Device Frost-Proof
Transport, storage and disposal 19.2 Make the device frost- 19.4 Dispose of old device proof Valuable raw materials can be reused through environmentally If the device is in a room at risk of friendly disposal. frost, e.g. B. in a holiday home, empty the device completely. -
Page 54: Customer Service
Customer service 20.2 AQUA-STOP guarantee 20 Customer Service In addition to warranty claims against Functionally relevant original spare the seller from the purchase contract parts in accordance with the relevant and in addition to our manufacturer's Ecodesign Regulation are available guarantee, we provide replacement from our customer service for a under the following conditions. -
Page 55: Technical Data
Technical data 21 Technical data Weight Max.: 45kg Tension 220 - 240V, 50Hz or 60Hz 2000 - 2400 W Connection value validation 10 - 16 A ¡at least 50 kPa (0.5 bar) ¡ Water pressure max. 1000 kPa (10 bar) at least 10 l/min Inflow quantity Cold water. -
Page 56: Declaration Of Conformity
Directive 2014/53/EU. You can find a detailed RED declaration of conformity online at BSH Hausgeräte GmbH hereby siemens-home.bsh-group.com on the declares that the device with Home product page of your device among Connect functionality is in accordance the additional documents. - Page 60 Geproduceerd door BSH Hausgeräte GmbH onder de handelsmerklicentie van Siemens AG BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com *9001848465* 9001848465 (030524) 442 V1...