Electrical Connection - Miele H 814 Operating Instructions Manual

Electrical connection
Electrical connection of the appliance
should be undertaken by a qualified
electrician in strict accordance with
national and local safety regulations.
This appliance conforms to the inter¬
ference supresslon regulation DIN EN
60555/VDE 0838.
Possible combinations:
The built-in cookerfoven with hob con¬
trols can bo combined with one of the
hobs listed below:
KM 121
KM 124
KM 125
KM 128
KM 120
m
131
KM 132
KM 133
KM 134
KM 141
KM 110
KM 114
KM 118
Mot all units are available in AUSTRA
L1A.
The separate reference sheet gives
detailed information on the combina¬
tion of the type of oven and hob, toge¬
ther with the rated load.
Electrical connection ILK,
This appliance is supplied with a 3-
core cable ready for connection lo an
a.c. single phase 240 V, 50 Hz elec¬
tricity supply. In the event of any
enquiry, please quote the voltage,
model and serial no. of the appliance,
as given on the dale plate located
behind the lower oven door on the
bottom right hand side.
Total rated load is as follows for model
given:
H553 lOOGGW
H 014 E/HQ16E
oven alone * 3000 W
f See below for the total rated load for
a Miele cooker used in conjunction
with a hob.
With the H 868 and all *E" models
connection should be made via a suit¬
able isolator which complies with nali-
ona and local regulations. The fuse
rating is 30 A.
Important
The wires In the mains lead of this
appliance are coloured in accordance
with the following code:
Green/yetfow ^ earth
Blue = neutral
Brown — live
WARNING
THIS APPLIANCE MUST 8E
EARTHED,
42