Table of Contents
Advertisement
AUTODOME 7100i│AUTODOME 7100i IR
Figure 10.5: 24VAC power supply with (1) the high-voltage section (120VAC, 230VAC), (2) the low-
voltage section (24VAC), and (3) the metal barrier that separates the two sections
The graphic that follows shows the connections for the power supply with wall arm (120
VAC, 230VAC models). Note: optional audio input and output cables and alarm input and
relay output cables are not shown. Those cables also come from the camera through the
wall arm mount and exit through one of the grounded conduit holes on the low-voltage side
of the power supply,
Figure 10.6: Connections for power supply with wall arm (or is it for PSU + lid?) (120 VAC, 230VAC
models)
Bosch Security Systems
Installation Manual
Connection | en
2023-09-29 | V06 | F.01U.410.315
61
Advertisement
Table of Contents
