156
4-5. Opening, closing the windows
Power windows
4-5.Opening, closing the windows
Opening and closing the
power windows
The power windows can be
opened and closed using the
switches.
Operating the switch moves the
windows as follows:
1
Closing
2
One-touch closing
3
Opening
4
One-touch opening
*
: To stop the window partway,
operate the switch in the opposite
direction.
■
The power windows can be
operated when
The power switch is in ON
■
Operating the power windows
after turning the fuel cell sys-
tem off
The power windows can be oper-
ated for approximately 45 seconds
even after the power switch is
turned to ACC or turned off. They
cannot, however, be operated once
either front door is opened.
■
Jam protection function
If an object becomes jammed
MIRAI Owners Manual_USA_M62034_en
between the window and the win-
dow frame while the window is clos-
ing, window movement is stopped
and the window is opened slightly.
■
Catch protection function
If an object becomes caught
between the door and window while
the window is opening, window
movement is stopped.
■
When the side window cannot
be opened or closed
When the jam protection function or
catch protection function operates
unusually and the side window can-
not be opened or closed, perform
the following operations with the
power window switch of that door.
●
Stop the vehicle. With the power
switch in ON, within 4 seconds of
the jam protection function or
catch protection function activat-
ing, continuously operate the
power window switch in the one-
touch closing direction or one-
touch opening direction so that the
side window can be opened and
*
closed.
●
If the side window cannot be
opened and closed even when
*
performing the above operations,
perform the following procedure
for function initialization.
1
Turn the power switch to ON.
2
Pull and hold the power window
switch in the one-touch closing
direction and completely close
the side window.
3
Release the power window
switch for a moment, resume
pulling the switch in the one-
touch closing direction, and hold
it there for approximately 6 sec-
onds or more.
4
Press and hold the power win-
dow switch in the one-touch
opening direction. After the side
window is completely opened,
continue holding the switch for
an additional 1 second or more.