Advertisement
IMPORTANT NOTICE
PRINTER USAGE:
If you have a printer connected via the external CD-Recordable/
Rewritable drive, then be sure to always have it's power switched on
when you want to use the printer.
Do NOT switch off the power to the external CD-
Recordable/ReWritable drive when the computer-system with this
device attached is fully booted and operational. This will cause the
computer to hang for a few minutes, when it is trying to use the
device which you switched off.
RECOMMENDATION:
If you do want to switch off the power to the external CD-
Recordable/ReWritable drive when the computer-system with this
device attached is fully booted and operational, then FIRST
disconnect the device from the system LOGICALY by using the
Connect-It utility provided, as follows:
•
Locate the Connect-It icon in the right hand bottom of your
screen, and open it by double-clicking on it.
•
Then disconnect the device by clicking on the 'disconnect' button
on your screen.
•
After this successfully ended, you can switch off the drive.
NOTE:
You can later switch on the drive and use it again, by clicking on the
'connect' button on your Connect-It screen.
3104 145 2000.2
Advertisement
