BENDIX/KING
2.4.3.2
Operation Configuration Procedure
The buttons referred to in the following procedure are located on the radar control panel or radar
indicator.
A. Press the WxA button to display the MAINT FUNCTIONS menu. See
B. Press the GND MAP button to move the select pointer on the display to OPERATION
CONFIG.
C. Press the WxA button to display the OPERATION CONFIG options. See
D. Press the GND MAP button to select each displayed option. Press the WxA button to se-
lect T (true) or F (false) in the bracket of the selected option. Set each option to the con-
dition that satisfies the installation.
FIGURE 2-7 MENUS FOR OPERATION CONFIGURATION
Rev 7, July/2002
00643I05.TDC
RDR 2000
figure
2-7A.
figure 2-7B.
Page 2-13