Advertisement
\
When you release this button, normal-speed play will resume (dur-
yt
ing play) or the player will return to the pause mode (during pause).
4< button:
To
go
backwards
at a high
speed
(several
times
higher than the normal playing speed).
|
444 button:
To go backwards
at a higher speed than the <4
button.
be button:
To
skip
ahead
at
a
high
speed
(several
times
higher than the normal playing speed).
PPP
button:
To
skip
ahead
at a higher
speed
than
the
pp
button.
CDP-101
@® » PLAY button and indicator
® 11 PAUSE button and indicator
@ RESET button
When this button is pressed, disc play is reset to the very beginning
of the first selection and the player stands by.
|
Display window
|
@® isc SET indicator
@ TRACK No. indicator
@
SCAN indicator
a
a ei
|
Lf il
TRACK
NO
MINUTE
SECOND
th SCAN
|
©
DISC SET
@
Time counter
® DISC SET indicator
The indicator flickers when the disc compartment is moving.
When the disc compartment has closed with a disc in place (in the
standby mode), and during disc playing, the indicator illuminates
steadily.
@® TRACK NO. indicator
The
indicator
shows
the
track
number
of the selection
being
played.
If you press the B®
or BR
button at the end of the disc, the in-
dicator will change to "7 7" indicating that the end of the last
selection
has
been
reached.
To
return
to a previous
selection
number, press the RESET, Me, <4 or <q
button. If you press the
<4 or <4
bution at the beginning of the disc, the indicator wil!
change to "/ /£", indicating that the beginning of the first selec-
tion has been reached.
-
@ SCAN indicator
'
This indicator illuminates while the player is searching for the point
on the disc you have programmed.
@® Time counter
The counter shows the location in a particular selection by means
of actual elapsed time. The first two digits of the counter show
playing time of the selection
in minutes, and the last two digits
show the seconds.
-
Rear panel
®
SYNC OUT (Synchro remote control output) jack
— only AEP and UK model —
(oe model:
up to Serial No. 501 neo)
UK model:
up to Serial No. 600,300
€) ACCESSORY connector
@ AUTO PAUSE switch
i
j
1
{
|
|
|
|
@ BEEP (buzzer) ON/OFF switch
'
LINE OUT jacks
®
ANTI SHOCK switch
© SYNC OUT (synchro remote control output) jack
— only AEP and UK mode! —
(Ge, model:
up to Serial No. ee
UK model:
up to Serial No. 600,300
Used for synchronized operation with Sony cassette decks.
See page 20.
@ ACCESSORY connector
@ AUTO PAUSE switch
Normally set to OFF.
When this player is used with an optional micropnone amplifier, set
to ON to pause after naving played each selection.
This auto pause
mode
is released when
the START
key on the
Remote Commander is pressed.
@ BEEP (buzzer) ON/OFF switch (bottom)
Set to ON to have a signal tone sounded when a signal from the
supplied
Remote
Commander
is received. Set the switch to OFF
when a signal tone is not necessary.
@ ANT! SHOCK switch
When the player is used in a place subject to excessive vibration
and the disc skips frequently,
set this switch to ON.
However, when
a defective disc is played with this switch set to
ON, and it may skip frequently, set this switch to OFF.
|
i
\
Advertisement
