Table of Contents
Advertisement
Connecting the
Cables
Figure A-4. Connecting the Power Cord.
A. Power Cord
B. Voltage Select Switch
1. Connect the power cord to the cardiograph as shown
in Figure A-4.
2. Plug the power cord into the wall outlet.
Warning
0
If you must use an ungrounded plug adapter to plug
the power cord into the wall outlet, you must also use
a ground strap to connect the equipotential connector
at the rear of the cardiograph to the power source
ground. Figure A-l shows the location of the equipotential
connector. Refer to the "Patient and Operational Safety
Notes" in Chapter 1, Getting Acquainted for more
information about using the equipotential connector.
Setting up Your Cardiograph for the First Time A-7
Advertisement
Table of Contents
