Error Codes - Philips 4000 Service Manual

PHILIPS 4000
Display
Espresso brew
button
Long espresso
brew button
Cappuccino
brew button
(OTC)
Frothed Milk
button (AMF)
Hot water/steam
button (CMF)
Espresso brew
button
Long espresso
brew button
Hot water/steam
button (EP4010)
Espresso brew
button
Cappuccino
brew button
Latte macchiato
button (EP4050)
Aroma Pre-ground
coffee button (EP4051)

1.10. Error codes

ERROR
CODES
01 The coffee grinder is blocked (grinder blades jammed or sensor not reading properly)
02 The grinder is disconnected (Only coffee grinder without electronic sensor)
The brew unit is blocked in work position*
03
The brew unit is blocked in home position*
04
Water circuit / flow meter problems (water circuit blocked or no flow meter signal)
05
Boiler temperature sensor short circuited
10
11 Boiler temperature sensor open circuit
The boiler temperature has exceeded the maximum allowed value (165°c)
14
The boiler temperature does not increase in the time established by the software.
Possible root casues:
1. Boiler power supply disconnected;
15
2. Incorrect boiler assembled (see Exploded View);
3. Partial power supply to boiler;
4. Triggered thermostats.
19 The machine does not receive the necessary voltage (power surges)
22 interface missing or unknown
HD MODELS
ON/OFF button
EP MODELS (EP4010)
ON/OFF button
EP MODELS (EP4050-4051)
ON/OFF button
LATTE MACCHIATO
DESCRIPTION
01 INTRODUCTION
Classic coffee
brew button
"Aroma" Pre-ground
coffee button
MENU button
Classic coffee
brew button
Aroma"
Pre-ground coffee
button
MENU
button
Classic coffee
brew button
Aroma Pre-ground
coffee button (EP4050)
CAFE' AU LAIT
CAFE' AU LAIT
button (EP4051)
MENU button
8/9