Audio Signal - Kenwood DMC-G7R Instruction Manual

DMC-G7R(K-En}
Disc name, track names, and other character information on a previously recorded
MiniDisc (master MiniDisc) can be copied in their entirety to a recordable MiniDisc
(Copy MiniDisc). This is called the NAME STAMP function.
. character : : character
Normal dubbing information Copying written data information
Audio signal Audio signal
Audio dubbing character
(recording track number) information copy
Written data cannot be copied from the following MiniDiscs:
® a Playback Only MiniDisc;
Notes
® when the total number of tracks on the master MiniDisc and that on the
recordable MiniDisc are not the same.
Copying character information in its Entirety (NAME STAMP Function)
Record the audio from the master MiniDisc to the recordable MiniDisc.
(Refer to pages 30 to 33.)
Recording side
aa
oe
|
O
Zz
uu
Playback side
At this time only the audio will be
dubbed, written data will not be
copied.
@ Make sure the total number of tracks on
the master MiniDisc and that on the
recordable MiniDisc are the same. If
they are the same, tracks can be divided
or combined using Edit functions. (Refer
to pages 52 to 53.)
Recordable
MiniDisc
@eWhen recording has been completed,
remove the recordable MiniDisc and insert
the master MiniDisc into the unit (DMC-
G7R).
dd
Label master MiniDiscs and recordable
MiniDiscs so that they are distinguishable.
@ In Stop status, press the EDIT/AUTO MARK/
EDIT/AUTO MARK TIME MARK key repeatediy until "NAME
eee STAMP" is displayed.
0 OVER
SS Tr caaep
REC IT cei
timed Eb we' § MEE OTE