Table of Contents
Advertisement
en Installation instructions
19.7 Installing the appliance
1.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
2.
Check the clearance to the adjacent appliances.
3.
ATTENTION!
When opening the appliance door, the appliance
may tilt forwards.
Hold the appliance in position when opening the
▶
appliance door.
Open the appliance door slowly.
30
4.
Screw the appliance to the unit on the opposite side
to the hinges.
5.
Pre-drill the screw holes in the unit on the side with
the hinges.
Cover the door hinges.
Use a wood drill with a 2 mm diameter.
6.
Remove any shavings from the cooking compart-
ment.
7.
Screw the appliance to the unit on the side with the
hinges.
8.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
19.8 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.
Advertisement
Table of Contents
