Fig; As Shown In Fig - Sony CRF-150 Service Manual

25.
27.
POWER SUPPLY CIRCUIT BOARD
REMOVAL
Remove the two screws shown in Fig. 2-13.
Turn the circuit board in the direction shown
by the arrow.
Fig. 213
AF CIRCUIT BOARD REMOVAL
Remove the four screws shown in Fig. 2-14.
Remove the circuit board in the direction
shown by the arrow.
Fig. 214
DIAL SCALE AND DIAL DRUM REMOVAL
Remove the chassis.
Remove the four screws shown in Fig. 2-15
Release the pointers from dial cords.
=й =
CRF-150
> Da
'pointer dia scale
Remove the dial scale.
5. Remove the drum holder A by removing the
two screws marked Ó in Fig. 2-16,
6. Release the two screws marked © in Fig. 2-16,
7. Pull the dial drum towards you.
Dial Drum Reassembly
1. Turn the sw band selector so that the osc coil
which has the minimum turns comes to the
vertical position as shown in Fig. 2-16.
2. Attach the dial drum to the drum holders
setting the two screws marked Oin Fig. 2-16.
3. Set the dial scale.
4. Turn the dial drum so that the drum indicates
SWIO and the distance between the dial scale
and the line on the drum becomes 544 inches
(2mm) as shown in Fig. 2-15.
Fasten the two screws marked * in Fig. 2-16.