9 NXDN TRUNKING SYSTEM
9.17 Adding a Group ID by Remote Control (Remote Group Add)
Operating the Transceiver
Receiving the message requesting to change the remote group
1
The transceiver starts receiving the message requesting to change the remote group.
"RECEIVE DATA" appears on the transceiver main display.
2
Receive the message requesting to change the remote group.
"COMPLETE" appears on the main display.
The transceiver adds the Regroup ID to the zone in an NXDN
Trunking system where the transceiver received the message.
If the change of the Group ID is permitted by the information in
the received message, "GRP ADD-D" appears on the transceiver
main display. In this case, the transceiver can transmit and
receive with a Regroup ID. The transceiver can also transmit and
receive by selecting a Group ID other than the Regroup ID by a
user operating transceiver keys.
FUNC (K)/Ver 4.00
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS
INDEX
241