8
PREPARING FOR USE
8.5
Preparing for rides on wet sand
8.6
Preparations for riding on wet and muddy surfaces
–
Check the radiator cap.
Value on the radiator cap
»
If the indicated value does not correspond to the required value:
M01129-01
–
Change the radiator cap.
–
Fit a waterproofing device on the air filter.
Waterproofing device for air filter (79006921000)
Info
See the KTM PowerParts fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
M01106-01
Your authorized KTM workshop can recommend the right carburetor tuning.
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
–
Mount the rain cover for the air filter.
Waterproofing device for air filter (79006921000)
Info
Follow the KTM PowerParts mounting instructions.
–
Adjust the carburetor jetting and setting.
Info
M01106-01
Your authorized KTM workshop can recommend the right carburetor tuning.
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling sys-
tem components if the engine or the cooling system are at oper-
ating temperature.
–
Allow the cooling system and the engine to cool down before you
open the radiator, the radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected immediately
with lukewarm water.
p. 143)
1.8 bar (26 psi)
33