Table of Contents
Advertisement
7.4
How to connect electrical wires and sensors
7.4.1 How to connect wiring to the terminal
Proceed as follows:
1. A screwdriver is inserted with a rocking motion to the stop.
2. The screwdriver is captivated, holding the CAGE CLAMP open, while the wire is
inserted.
3. The screwdriver is withdrawn and the wire is automatically secured.
PAW-VP•LDHW - Technical Manual – 2020-07
Electrical Wiring
Strip 100 mm
Insulation tape
Shield mesh
Shield mesh
7
69
Advertisement
Table of Contents
