Transformer And Motor Cable Terminals; Transformer Cable Terminals; Motor Cable Terminals - ABB ACS5000 User Manual

3.6. Transformer and motor cable terminals

3.6.1. Transformer cable terminals

DANGER
Hazardous voltages!
→ Complete the steps in Section 2.3.2, "The 7 steps that save lives", page 25 before
you remove the side and back walls from the drive to access the grounding studs in
a PCU.
– To access the transformer cable terminals (busbars), remove the back wall of the primary
PCU (see Fig. 8 for PCU location).
For information on the dimensions and the motor busbar arrangement, see Section 6.7.2.2,
"Connecting the cables", page 102 and "Appendix C – Mechanical drawings"

3.6.2. Motor cable terminals

– To access the motor cable terminals (busbars) at the back of the COU cabinet, open the COU
swing frame or remove the back wall of the COU (see Fig. 8 for COU location).
The COU also contains the charging transformer for the DC-link, the EMC filter, and the common
mode filter.
For information on the dimensions and the motor busbar arrangement, see Section 6.7.2.2,
"Connecting the cables", page 102 and "Appendix C – Mechanical drawings".
PRODUCT
ACS5000W gen. 2
DOCUMENT KIND
User manual
POWER ELECTRONICS AND CABINET FEATURES
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
J en 48/186