Front Wheel Speed Sensor On-Vehicle Inspection; Front Wheel Speed Sensor Removal And Installation; Front Wheel Speed Sensor Inspection; Rear Wheel Speed Sensor On-Vehicle Inspection - Suzuki GRAND VITARA 2005 Service Manual

Hide thumbs Also See for GRAND VITARA 2005:
Table of Contents

Advertisement

4F-47 Electronic Stability Program:
ESP® Hydraulic Unit / Control Module
Assembly On-Vehicle Inspection
Refer to "ABS (ESP‚) Hydraulic Unit / Control Module
Assembly On-Vehicle Inspection: in Section 4E".
ESP® Hydraulic Unit / Control Module
Assembly Removal and Installation
Refer to "ABS (ESP‚) Hydraulic Unit / Control Module
Assembly Removal and Installation: in Section 4E".
Front Wheel Speed Sensor On-Vehicle
Inspection
Refer to "Front Wheel Speed Sensor On-Vehicle
Inspection: in Section 4E in related manual".
Front Wheel Speed Sensor Removal and
Installation
Refer to "Rear Wheel Speed Sensor Removal and
Installation: in Section 4E in related manual".

Front Wheel Speed Sensor Inspection

Refer to "Rear Wheel Speed Sensor Inspection: in
Section 4E in related manual".
Rear Wheel Speed Sensor On-Vehicle
Inspection
Refer to "Front Wheel Speed Sensor On-Vehicle
Inspection: " since rear wheel speed sensor is the same
as front wheel speed sensor.
Rear Wheel Speed Sensor Removal and
Installation
Refer to "Rear Wheel Speed Sensor Removal and
Installation: in Section 4E in related manual".
Rear Wheel Speed Sensor Inspection
Refer to "Rear Wheel Speed Sensor Inspection: " since
rear wheel speed sensor is the same as front wheel
speed sensor.
Front Wheel Encoder On-Vehicle Inspection
Refer to "Front Wheel Encoder On-Vehicle Inspection:
in Section 4E in related manual".
Front Wheel Encoder Removal and Installation
S5JB0B4606089
CAUTION
!
Front wheel encoder is included in front
wheel hub assembly. If front wheel encoder
needs to replaced, replace it as a front wheel
hub assembly.
S5JB0B4606090
For removal and installation of front wheel hub
assembly, referring to "Front Wheel Hub Assembly
Removal and Installation: in Section 2B in related
manual".
S5JB0B4606091
Rear Wheel Encoder On-Vehicle Inspection
Refer to "Front Wheel Encoder On-Vehicle Inspection:
in Section 4E in related manual".
Rear Wheel Encoder Removal and Installation
S5JB0B4606092
CAUTION
!
Rear wheel encoder is included in rear wheel
hub assembly. If rear wheel encoder needs to
S5JB0B4606093
replaced, replace it as a rear wheel hub
assembly.
For removal and installation of front wheel hub
assembly, referring to "Rear Wheel Hub Assembly
Removal and Installation: in Section 2C in related
S5JB0B4606094
manual".
Master Cylinder Pressure Sensor On-Vehicle
Inspection
1) Calibrate master cylinder pressure sensor referring
to "Sensor Calibration: ".
S5JB0B4606095
2) Check that basic brake system other than ESP®
referring to "Brake Diagnosis Note: in Section 4A in
related manual".
3) Connect SUZUKI scan tool to data link connector
S5JB0B4606096
(DLC) (1) with ignition switch OFF.
Special tool
(A): SUZUKI scan tool
S5JB0B4606097
(A)
S5JB0B4606098
S5JB0B4606099
S5JB0B4606100
S5JB0B4606101
1
I5JB0A450008-01

Advertisement

Table of Contents
loading

Table of Contents