LOG O N TO AWIN GW100 R EV.2 WIR ELESSHART
GAT EWAY
6.2
Log onto AWIN GW100 rev.2 WirelessHART Gateway
1. Apply power to the gateway and run a browser program (such as, Internet Explorer or
Chrome) on your computer. Wait until the ST LED is on (not flashing), indicating the
boot-up procedure is complete and the AWIN GW100 rev.2 is operational.
2. Enter the following IP address into the "Address" field of the browser:
https://172.16.16.10
If a browser prompts security warning (due to certificate) then proceed.
3. Provide the following details on the login screen and select Login.
Enter the default login credentials:
– Username: admin
– Password: admin
6.3
View Gateway Information
After login, the home page shows the following basic information about the AWIN GW100
rev.2 gateway.
30
Figure 9: Login screen
CO NF IG URATI ON
3B NP 10299 2 B