Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
3.7 FAX Troubleshooting (Epson Artisan 800/
Epson Stylus Photo PX800FW/TX800FW only)
3.7.1 FAX Log
When an error related to fax occurs, it is not only indicated on the LCD but also saved
as a log file. The error code is recorded in it, and according to this log the contents of
the error can be confirmed
Table 3-31. FAX Log (1)
Log Name
Latest log
The latest communication log of sending / polling reception Nonvolatile
(Last Transaction)
The following information is stored.
Item
Communication
start date / time
Communication
type
Communication ID
Communication
log (Fax Log)
Airtime
Communication
pages
Communication
result
Note * :
For error codes, see
(p.82).
The information stored in this log is the same as the
communication log. However, since the airtime is
Power failure
log (Fax Log)
" Unknown" in this case, the result of it is recorded as
" power failure" .
TROUBLESHOOTING
FAX Troubleshooting (Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW only)
https://www.manualsbooks.com
Description
Destination
memory
Information
Year/month/day/hour/minute
Sending/receiving/polling reception
Sending/polling reception:
• Destination name of speed dial
(first 20 characters)
• Telephone number (last 20 characters)
• Destination fax ID (20 characters)
Nonvolatile
Receiving:
memory
• Destination fax ID (20 characters)
Hour/minute/second
0 to 100
Common:
*
Normal/cancel/error code
Sending/polling reception:
No dial tone detected/No fax signal
detected/Busy tone detected
Table 3-33. Error Code List
Nonvolatile
memory
� � � �
The communication log is not stored under the following conditions:
�
When the sending operation is canceled while storing B&W
� � �
image or waiting for redialing.
� �
In the case of a power failure during the operation of sending/
polling reception including waiting status for redial, or during
receive operation.
When the receiving operation is canceled before the fax signal is
detected.
If the fax signal is not detected during receiving operation.
Save
Log Name
The following information of the latest communication is stored.
Communication
start date / time
Communication type Sending/receiving/polling reception
Communication ID
Airtime
Communication
pages
Protocol trace
Communication
result
Diagnosing code
Protocol data
Note * : If a large amount of FIF is received, the recorded
Table 3-32. FAX Log (2)
Description
Item
Information
Year/month/day/hour/minute
Sending/polling reception:
• Destination name of speed dial
(first 20 characters)
• Telephone number (last 20 characters)
• Destination fax ID (20 characters)
Receiving:
• Destination fax ID (20 characters)
Hour/minute/second
0 to 100
Common:
Normal/cancel/error code
Sending/polling reception:
No dial tone detected/No fax signal
detected/Busy tone detected
10 bytes
The latest 43 commands/responses*
• Time stamp
• Sending / receiving
• Command /response code
(See
Table 3-34. Command/Response
Code
(p.83))
• FCF/FIF (first 33 octets).
command/response may be less than 43.
Revision C
Save
Destination
Volatile
memory
81
Confidential