Philips S9712 User Manual page 35

Problem
The shaver does
not work when I
press the on/off
button.
The shaver does
not shave as
well as it
used to.
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
Possible cause
The shaver is still
attached to the
mains. For safety
reasons, the shaver
can only be used
cordlessly.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset
the shaver.
ENGLISH
Solution
Unplug the shaver and press
the on/off button to switch
on the shaver.
Recharge the battery
(see chapter 'Charging').
Press the on/off button
for 3 seconds to deactivate
the travel lock.
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads
(see chapter 'Cleaning and
maintenance').
Clean the shaver thoroughly
before you continue shaving
(see chapter 'Cleaning and
maintenance').
Reset the shaver by pressing
the on/off button for
approx. 7 seconds
(see chapter 'Replacement').
35