Operation - Bosch SmartphoneHub CUI100 Original Operating Instructions

English – 10
Start-up
Requirements
The eBike can only be switched on when the following
requirements are met:
– A sufficiently charged eBike battery is inserted (see
operating instructions for the eBike battery).
– The speed sensor is connected properly (see drive
unit operating instructions).
Switching the eBike on/off
The following options are available for switching on
the eBike:
– Press the on/off button (2) of the on-board com-
puter with the eBike battery inserted.
– Press the on/off button of the eBike battery (see
operating instructions for the eBike battery).
The drive is activated as soon as you start pedaling
(except for in the push assistance function or with the
assistance level OFF). The drive output depends on
the settings of the assistance level.
As soon as you stop pedaling when in normal opera-
tion, or as soon as you have reached a speed of
20 mph, the drive switches off the assistance. The
drive is automatically re-activated as soon you start
pedaling again and the speed is below 20 mph.
The following options are available for switching off
the eBike:
– Press the on/off button (2) of the on-board com-
puter.
– Switch off the eBike battery using its on/off button
(bicycle manufacturer-specific solutions are possi-
ble when there is no access to the eBike battery on/
off button; see the bicycle manufacturer operating
instructions).
The system shuts down after being switched off. This
takes approximately three seconds. It cannot be
switched back on until shutdown has been com-
pleted.
If the eBike is not moved for approx. 10 min and no
button is pressed on the on-board computer, the
1 270 U20 XBC | (16.03.2023)

Operation

eBike switches off automatically in order to save en-
ergy.
Note: Always switch off the eBike when you park the
eBike.
Note: If the battery of the SmartphoneHub is empty,
you can still switch on your eBike using the eBike bat-
tery. The SmartphoneHub battery begins charging au-
tomatically once the eBike battery is switched on. Al-
ternatively, the battery of the SmartphoneHub can be
charged via the USB port.
Linking the SmartphoneHub with a
smartphone
You can expand the indicators and functions of the
SmartphoneHub using the COBI.Bike smartphone
app. This app can be downloaded free of charge from
the App Store (for Apple iPhones) or from the Google
Play Store (for Android devices).
To connect your SmartphoneHub with the smart-
phone, open the COBI.Bike app on your smartphone
and follow the instructions in the app.
Bosch eBike Systems