Intended Use - Panasonic AccuPulse QP Low Noise Series Operating Instructions Manual

• To prevent leakage, overheating, smoke
EN
generation, fire, and rupturing from occur-
ring, follow these instructions when han-
dling our rechargeable power tools (tool
main body/battery pack/charger).
- Do not allow material cuttings or dust to
fall onto the battery pack.
- When storing, remove any material cut-
tings and dust from the battery pack,
and place the battery pack separately
from metal objects (screws, nails, etc.)
when storing in the tool case.
• Do not handle the rechargeable power
tools in the following way.
(There is a hazard of smoke generation,
fire, and rupturing)
- Use or leave in places exposed to rain
or moisture
- Use submerging in water
Symbol
V
n
0
... min
-1
Ah
battery pack. Do not charge or
temperature. Do not expose to
Do not disassemble or modify.
Do not expose to rain or water.
Meaning
Volts
Direct current
No load speed
Revolutions or reciprocations
per minutes
Electrical capacity of battery
pack
To reduce the risk of injury,
user must read and under-
stand instruction manual.
Do not incinerate or heat
use under conditions of high
high temperatures.

1.2.3 INTENDED USE

This tool is a Cordless Impact Driver / Wrench
can be used to tighten bolts, nuts, and screws.
Additionally, it provides a torque control func-
tion that automatically stops tool operation
when a preset load is reached to deliver con-
sistent tightening torque.
Additionally, a separately available Assembly
Qualifier can provide wireless monitoring to
determine whether tightening has been com-
pleted properly.
IMPROPER USE
The use of the tool other than INTENDED
USE is dangerous and must be avoided.
The tool must not be used for the purposes
such as the following;
• to mix paint or building materials,
• polishing, grinding, sharpening, engraving.
RESIDUAL RISK
Some residual risks remains even with proper
use of the tool such as the following;
• contact with the rotating bit
• contact with the sharp edges of material or
something.
‒ 8 ‒