Sony LF-B20 Settings Manual page 16

To display the remote control for a connected
device on the PSP system, you must first save
®
the data for the remote control on Memory Stick
Duo™ media and then complete [Remote
Control Settings] (1 page 20).
For more information on remote control data, see
sony.com/locationfree/ownerslounge/psp
Depending on the connected device, the usage
method of the remote control for the device may
vary. The main functions that are commonly
available on remote controls are explained below.
1 Used to switch the function to be
controlled by the remote control for
multifunction devices such as hard disk/
DVD combined video recorders.
2 Used to turn the connected device on/off.
3 Used to switch among control panels for
connected devices with remote controls
that have multiple control panels.
4 Used to operate the connected device.
z
Tip
To make faster response to the remote control, video
and audio are fast-forwarded when operating the
remote control. It is not a malfunction.
Notes
• Save remote control data in the following location
on your Memory Stick Duo™:
• Use the same method of operation as you would with
the remote control supplied with the connected
device. However, buttons for features that are not
available in the connected device cannot be used even
if they are shown on the on-screen remote control.
• Button names as shown on the on-screen remote
control may be different from the names shown on the
remote control supplied with the connected device.
• When using a multifunctional connected device such
as a combined Hard Disk/- or DVD player/video
deck, if the function controlled by the remote control
(see figure 1) is not set correctly the remote control
will not function after the connected device is turned
on. In this case, switch the function controlled by the
remote control to the function in use.
Using the learning remote control
data
The learning remote control data created by the
LocationFree Player LFA-PC20 can be used on
the PSP system. Open the shortcut of the folder
®
"RC_DATA" on the desktop of your computer
which is installed with LFA-PC20, create a folder
on Memory Stick Duo™ as shown below, and
then copy the learning remote control data from
the folder "RC_DATA" of your computer to the
folder "RC_DATA" on Memory Stick Duo™.
MSSONY
Changing the Screen Mode
1
Select from the control panel, and
then press the
Each time the
Screen Mode will change as follows:
16
LF RC_DATA
button.
button is pressed, the