Emergency Recording; Picture In Video - HP f920 Series User Manual

3.2 Emergency Recording

To Start the Emergency Recording, do the
following:
1. During Video Recording, press the
button to enter emergency recording
mode, the "Emergency" message will
be shown immediately on the upper left
corner of the screen, and the recorded
file will be protected.
2. The emergency video recording length
is same as the recording interval setting. When the emergency recording
length reaches the setting, the system will return to the general
recording mode.
Note:
1. If the Collision Detection function is enabled and a collision is detected, the camcorder will automatically
trigger the emergency recording.
2. The emergency file is created as a new file and saved in Emergency folder, which will be protected to avoid
being overwritten by normal loop recording. The Emergency folder will occupy 40% of available memory
card capacity. For example, if you use 8GB memory card, about 3.2GB memory space will be saved for
emergency files. When the Emergency folder is full, the oldest emergency file will be automatically deleted
by the newest emergency file.

3.3 Picture in Video

You can also use this camcorder to take
snapshots of the current scene.
1. In recording status, press
capture recording screen shot.
2. When the icon
central of screen, it means the
screenshots is completed.
Note:
1. The screen shots image resolution quality is depending on the video resolution setting.
2. The definition of picture in video by this product, the picture resolution is limited by the speed of the target
object and changes in ambient lighting. The photograph function is better used for taking still pictures in
accident scenes or when the car is stopped to wait for a traffic light.
OK
to
shows in the
21