Advertisement
INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 1:
(SEE FIGURE 2)
•
Open parts bags labelled "
all parts needed are present.
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
NOTE: Not all hardware will be used. Unused parts may be
discarded after assembly
STEP 2:
(SEE FIGURE 3)
•
Remove tractor hood. (Refer to tractor manual.)
•
Remove an (LT) Lawn Tractor heat shield like the one
shown. Remove a (GT) Garden Tractor heat shield
like the one shown only if you need access to inside
of tractor frame during step 5.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
A" and "B" and verify that
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
A
(parts bag "A")
PARTS BAG "B"
Ref.
Part
Qty. Description
A
48894
2
Self Threading Bolt, 3/8-16 x 1-1/2"
B
43062
2
Hex Bolt, 3/8-16 x 1-1/2"
C
43001
4
Hex Bolt, 3/8-16 x 1"
D
44072
4
Whizlock Nut, 3/8"
E
43003
4
Lock Washer, 3/8"
F
44742
2
Plug
65932
1
Bumper
(LT) LAWN TRACTOR
(GT) GARDEN TRACTOR
E
C
B
D
(not full size)
(parts bag "A")
FIGURE 2
REMOVE THIS
STYLE HEAT SHIELD
REMOVE THIS HEAT SHIELD
ONLY IF MUFFLER MUST BE
MOVED IN STEP 4.
FIGURE 3
F
5
Advertisement
