Connecting To The Network - Panasonic AG-CX8 Basic Operating Instructions Manual

Card reader mode
Data (files) for performing nonlinear editing on a computer are transferred.
≥ The unit supports USB2.0.
A Memory card *1
B USB2.0 cable *2
C Computer
*1 Memory cards are optionally available. They are not supplied with the unit.
*2 A USB2.0 cable is not supplied with the unit.
Use a commercially-available generic USB cable conforming to USB2.0. If possible, we
recommend using a cable with a length of 1.5 m (approx. 4.9 feet) or less.
The unit does not offer a bus-powered function.

Connecting to the network

(For the /
CX7
This unit is equipped with wireless LAN. It can connect to wireless LAN devices via a network.
(For the )
CX10
This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired
LAN.
To use a wired LAN, use the supplied USB HOST conversion cable and USB ethernet adaptor
to connect a LAN cable.
Use the following cable for connections:
j LAN cable (STP
* STP (Shielded Twisted Pair)
0 Do not use any other USB HOST conversion cables except the supplied one.
0 Do not use any other USB ethernet adaptors except the supplied one.
)
CX8
* , category 5 or better, maximum 100 m (approx. 328 feet))
What you can do with this unit



23
(ENG) DVQX2103