Page 1
Dryer User Manual B5T69253W B5T69233MG B5T69253MG 2960313733_EN/230523.1442...
Page 2
Dear Customer, Please read this guide prior to use this product! Thank you for choosing Beko product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use.
Page 4
6 Running the product ................19 6.1 Control Panel ......................19 6.2 Symbols ......................19 6.3. Preparation of drying machine ................19 6.4 Program selection and consumption chart ............20 6.5 Auxiliary functions ....................23 6.6 Warning indicators ....................23 6.7 Starting the program ...................24 6.8 Child Lock ......................24 6.9 Changing the program after it is started ..............24 6.10 Cancelling the program ..................25 6.11 End of program ....................25...
1 Safety Instructions This section includes the safety instructions necessary to prevent the risk of personal injury or material damage. • Our company shall not be held responsible for damages that may occur if these instructions are not observed. • Installation and repair operations shall always be performed by Authorized Service.
• Keep the packaging materials away from children. Risk of injury and suffocation. • Keep all additives used with the product away from children. • Before disposing of the product, cut the power cord and destroy the loading door. 1.3 Electrical Safety •...
1.5 Installing safety • To prepare the product ready for installation, ensure that the electrical installation and water drain is proper by checking the information in the user manual. If it is not suitable for installation, call a qualified electrician and plumber to arrange the utilities as necessary.
• Plug the product in a grounded socket that conforms with the voltage, current and frequency values specified in the type label. • Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact. •...
Page 9
• If all items cannot be removed rapidly and cannot be placed where heat can dissipate, do not stop the drying machine before drying cycle completed. • The last part of the drying machine cycle is conducted without heating (cooling cycle) in order to ensure that the items are kept at a temperature that will not harm the items.
1.7 Maintenance and cleaning safety • Do not wash the product by spraying or pouring water on it. Do not use a pressure cleaner, steam cleaner, hose or pressurised gun to clean the product. • Do not use sharp or abrasive tools to clean the product. •...
2 Environmental instructions 2.1 Compliance with the WEEE Regulations and Waste Disposal This product does not contain the dangerous and prohibited materials indicated in the “Regulation on The Control of Waste Electrical and Electronic Equipment” published by Ministry of Environment and Urbanisation of Republic of Turkey. Complies WEEE Regulations.
3 Your drying machine 3.1 Technical specifications Height (Min. / Max.) 84,6 cm / 86,6 cm* Width 59,8 cm Depth 67,2 cm Capacity (max.) 9 kg** Net weight (± %10) 48 kg Voltage Rated power input See type label*** Model code * Min.
4 Installation • Once the drying machine is installed, the connections must stay stable. After placing the drying machine, ensure that the back wall does not come in contact Read the “Safety Instructions” first! with any extrusion (a water tap, electrical outlet etc.).
4.3 Connection of water drain hose 1 Pull hose at the behind of the dryer by hand in order to disconnect it from where it is on products with vapour feature connected. Do not use any tools to remove You can directly drain accumulated water the hose.
4.5 Moving the drying machine • Drain the water in the drying machine completely. • If the product is connected via direct discharge, remove the hose connections. The drying machine is recommended to be moved in upright position. Otherwise, tilt it to the right side when viewed from the front and move the drying machine.
5 Preparation 5.3 Preparing the laundry to be dried Items such as coins, metal parts, needles, nails, screws, stones etc. may damage the drum group of the product or may cause functional Read the “Safety Instructions” first! operation issues. Therefore check all laundry that will be loaded to the product.
• If you are using environment friendly filter, you are not required to clean the filter after every cycle. When the environment friendly icon is lit on the screen, change the filter cloth. 5.5 Correct load capacity NOTICE If the laundry in the product exceed maximum load capacity, it may not...
6 Running the product 6.1 Control Panel 1. On/Off/Program Selection button. 5. Low temperature selection and time program selection button. 2. Start / Stand-by button. 6. Audible warning and child lock selection 3. End time selection button. button. 4. Steam sellection button. 7.
6.4 Program selection and consumption chart Table of steam functioned cycles Programmes Programme Description Is a cycle aimed to reduce the wrinkle 1,5 (6 pieces) level on shirts and t-shirts using a steam function. This cycle usually eliminates the need for ironing for casual shirts after Ready to Wear* drying.
Page 21
Table of non-steam functioned cycles You may dry your cotton laundry to be ironed in this program to have them Cottons Iron dry 1000 slightly damp for ease of ironing. (Shirt, T-shirt, tablecloth, etc.) Use this programme to dry woolen garments such as jumpers that are WoolProtect washed according to the instructions.It...
Page 22
Energy consumption values Programmes Capacity (kg) Cottons Eco** 1000 1,44 Cottons Iron dry 1000 1,20 Synthetics cupboard dry 0,55 "Cottons Eco programme" used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet Cottons laundry and that it is the most efficient programme in terms of energy consumption for Cottons.
3. Press the End Time selection button and Allergy UK is the trademark of set the delay time you wish. End time LED the British Allergy Foundation. turns on. (When pressed and hold the The Seal of Approval has been button, End Time proceeds non-stop).
Cleaning of filter drawer/ • For example, Pause the program and turn the On/Off/Program Selection button to heat exchanger select the Extra Dry program in order to Warning symbol flashes periodically to remind select the Extra Dry program instead of that filter drawer must be cleaned.
6.10 Cancelling the program Getting the machine ready Steam tank must be filled before the initial use If you want to cancel the program and of the steam functioned cycles. Therefore, terminate the drying operation for any reason when using the machine for the first time, after the drying machine starts running, Pause it is required to dry laundry using a steam- the program and turn the On/Off/Program...
7 Maintenance and cleaning • Open both of the lint filters (outer and inner) and remove the fibres with your hands or with the brush on the air deflector. You can clean the hair in the filters with a vacuum cleaner.
• Insert the lint filters on one another and place it back in its place. Clean the metal surfaces of the sensor 4 times a year. Do not use metal tools to clean the sensors’ metal surfaces. Due to fire and explosion hazard, do not use solutions, cleaning materials •...
Clean the fibre on the metal surface of the condenser with damp cloth or the brush on the air deflector in up - down direction. Do not clean with If fibre is accumulated in the funnel on the left - right direction water tank, remove it under running water.
Page 29
When the air deflector cover is removed, it is normal to have water at the plastic section in front of the condenser. If you see fibre accumulation on the fan cover and the toe board, remove with a cloth. Do not have weight on the toe board when it is open.
8 Troubleshooting The drying operation takes too long. Fibre filter (interior and exterior filters) pores may be clogged. >>> Wash the fibre filters with warm water and dry them The front side of the condenser may be clogged. >>> Clean the front side of the condenser. The ventilation grills in front of the machine may be closed.
Page 31
The fibre filter cleaning icon is lit. Fibre filters (interior and exterior filters) may be unclean. >>> Wash the filters with warm water and dry them. A layer may be formed in the fibre filter pores, leading to clogging. >>> Wash the filters with warm water and dry them. A layer may be formed in the fibre filter (internal and external filters) pores that leads to clogging.<<Wash the filters with warm water and dry>>...
Page 32
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 392/2012 BEKO Supplier name or trademark B5T69253W B5T69233MG / 7188288590 Model name 7188288610 B5T69253MG / 7188383260 Rated capacity (kg) Air Vented Type of Tumble Dryer Condenser A+++ Energy efficiency class Annual Energy Consumption (kWh)