Operation From The Connection Software - Sharp PN-ZB03W Operation Manual

Operation from the connection software

Operate from the connection software on the computer whose screen is displayed.
TIPS
• Screen display by operation from the computer must be allowed. (
• On touch-applicable models, you can also operate by touching the screen on the monitor.
1. Click "Play" ( ) in the connection software.
The screen of the computer is displayed on the monitor.
5
1 2
1.
Wireless boards found from the computer appear. (See page 19.)
2. Split Screen
Set 4-screen display.
3. Play
The screen of the computer is displayed on the monitor.
During screen display, "Stop" (
4. Mute
Mute the audio of the currently connected device.
Click when the audio is muted to unmute.
5. Menu
Preferences : Configure settings for the connection software. (See page 20.)
Capture & Save screen : Save the screen as an image file (JPEG). (See page 21.)
Disconnect : Break the connection with the wireless board.
About : Display the version and license information of the connection software.
Quit : Exit the connection software.
6. Minimize
Minimize the operation screen.
7. Close
Exit the connection software. (See page 27.)
6 7
3 4
) and "Pause" ( ) appear.
)
Toolbar (See page 25.)
* Only appears when touch-
applicable model is used.
1 2 3
7
4
17
E