Setting The Phone's Ip Address In Lan - Siemens Gigaset A580 User Manual

Setting the phone's IP address in LAN

The base station requires an IP address in order to be "recognized" by the LAN
(the router).
The IP address can be assigned to the base station automatically (by the router)
or manually.
u
If performed dynamically, the router's DHCP server automatically assigns
the base station an IP address. The base station's IP address can be changed
according to router settings.
u
If performed manually/statically, you assign the base station a static IP
address. This may be necessary depending on your network configuration.
ú For information on making the local network settings on the Web configurator,
£
Page
Activating/deactivating dynamic assignment
¢
§Menu§
~
Dynamic IP address
If you deactivate dynamic assignment, you must set the IP address and subnet
mask of the base station, the default gateway and DNS server manually.
A corresponding message is displayed.
Please note
To assign the IP address dynamically, the DHCP server on the router must be
activated. Please also read the user guide for your router.
Viewing/changing the base station IP address
You can only change the IP address if you have deactivated dynamic assign-
ment.
192.168.2.2 is the default.
¢
§Menu§
~
IP Address
The current IP address is displayed.
~
For information on the IP address, please see
Page 178.
103.
¢ ¢
Settings Base
Enter the system PIN and press
(‰ = on)
Select and press
¢ ¢
Settings Base
Enter the system PIN and press
Select and press
If necessary, enter the IP address and press
Making VoIP settings on the handset
Local Network
.
§OK§
to change the current settings.
§OK§
Local Network
.
§OK§
.
§OK§
Page 103
.
§OK§
and the glossary on
91