Table of Contents
Advertisement
Product Overview
1. Reverse
3. Engine
safety
plate
2. Control
4. Battery
panel
Controls
Become familiar with all the controls (Figure 6) before you
start the engine and operate the machine.
1. Key switch
2. Throttle lever
3. Choke lever
4. Hour meter
Figure 5
5. Tie-down/
7. Chip
lift point
shield
6. Track
8. Grinder
Figure 6
5. Traction control
6. Reference bar
7. Grinder control lever
Key Switch
The key switch has 3 positions: Off, Run, and Start.
To start the engine, rotate the key to the Start position.
Release the key when engine starts and it will move
automatically to the Run position.
To stop the engine, rotate the key to the Off position.
Throttle Lever
Move the control forward to increase the engine speed and
rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever forward.
After the engine starts, regulate the choke to keep the engine
running smoothly. As soon as possible, move the choke lever
all the way rearward.
Note: A warm engine requires little or no choking.
Hour Meter
When the engine is off, the hour meter displays the number
of hours of operation that have been logged on the machine.
Reference Bar
When driving the machine, use the reference bar as a handle
and a leverage point for controlling the traction control. To
ensure smooth, controlled operation, do not take both hands
off of the reference bar while operating the machine.
Traction Control
1. Reference bar (does not move to give you a reference point
and a fixed handle to hold while operating the traction unit)
G025098
2. Traction control (moves to control the machine)
•
To move forward, move the traction control forward
(Figure 8).
12
Figure 7
Advertisement
Table of Contents
