Package Contents DIR-859 AC1750 High Power Wi-Fi Gigabit Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements Network Requirements: • An Ethernet-based broadband modem...
Hardware Overview Power LED A solid green light indicates a proper connection to the power supply. Internet LED A solid green light indicates a connection to the Internet port. A solid green light indicates a successful connection using WPS. The light WPS LED will blink during the WPS process.
• Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the DIR-859 router can work properly. Please contact your ISP or refer to the user manual for your modem/router device.
Page 5
Card for the Wi-Fi network name (SSID) and Wi-Fi password of the router. Complete steps 4 and 5 before attempting to connect. INTERNET 12V --1.5A POWER DIR-859 Computer Ethernet Cable Plug the power back into your DSL or cable modem. Please wait about one minute before continuing.
There are two ways to configure your router: A. Web Browser - Use a web browser from your computer. B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app. Refer to the QRS Mobile Setup section for more information.
Page 7
When the Welcome screen appears, click Next to continue. The router will automatically detect your Internet connection type. If not, then select your Internet connection and click Next to continue. DSL (PPPoE) users enter your PPPoE user name and password supplied by your ISP.
Page 8
Click Next to continue. Continue with the Setup Wizard to finish configuring your DIR-859 router. Once completed, the Internet LED will turn green indicating that your router is connected to the Internet.
Page 9
B. QRS Mobile Setup Scan the code below or search “QRS Mobile” (App Store or Google Play) to download the QRS Mobile App to your iPhone, iPad, or Android device. Android QRS Mobile App Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device.
Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. You can also connect wireless devices to the DIR-859 router using WPS: 1. Press the WPS button on the DIR-859 for three seconds.
Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.