Steps
1. Position the fan duct to align it with the slots on the computer chassis.
2. Press the fan duct until it clicks into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Hard-drive assembly
Removing the 2.5-inch hard-disk drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
duct.
About this task
The following images indicate the location of the 2.5-inch hard-disk drive assembly and provide a visual representation of the
removal procedure.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
21