Integrus Transmitters - Bosch Integrus Installation And Operation Manual

Integrus
–
–
–
They can operate with a rechargeable NiMH battery pack or with disposable batteries.
Charging circuitry is incorporated in the receiver.
Charging equipment
Equipment is available for charging and storing 56 infra-red receivers. Two versions are
available:
–
–
3.2

Integrus Transmitters

The transmitter is the central element of the Integrus system. It accepts asymmetrical audio
sources from a maximum of 32 external channels (dependent on the transmitter type) and can
be used with the Digital Congress Network (DCN) and DCN Next Generation conference
systems. It can also be used with analogue discussion and interpretation systems (e.g. CCS
800 with up to 12 interpreter desks), or as a stand-alone system distributing external audio
sources.
Transmitter front view
Figure 3.2 Transmitter, front view
1
2
3
4
5
Bosch Security Systems B.V.
LBB 4540/04 for 4 audio channels
LBB 4550/08 for 8 audio channels
LBB 4540/32 for 32 audio channels
LBB 4560/00 charging suitcase for portable systems
LBB 4560/50 charging cabinet for permanent systems
1
Mains on/off switch - After switching the mains on, the transmitter starts up and the
display (3) will light-up.
Mini IR-radiator - Four IREDs, transmitting the same infra-red signal as the radiator
output. This can be used for monitoring purposes. They can be disabled via the
configuration menu.
Menu display - A 2x16 character LCD-display gives information about the transmitter
status. It is also used as a an interactive display for configuring the system.
Menu button - A turn-and-push button to operate the configuration software in
combination with the display (3)
Monitoring headphone output - A 3.5 mm (0.14 inch) jack socket to connect a
headphone for monitoring purposes. It can be disabled via the configuration menu
Installation and Operation manual
2 3 4
System Overview | en
5
IOM-INT | V1.1 | 2010.12
9