Steps
1. Insert the media-card reader into its slot on the system chassis.
2. Close the media-card reader bracket.
3. Replace the screw that secures the media-card reader bracket to the system chassis.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Communication card
Removing the communication card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the communication card and provide a visual representation of the removal
procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
77