Motor and Hall Sensor
LG Electronics Training Center, LGEAI, U.S.A.
Motor and Hall Sensor
LG Electronics Training Center, LGEAI, U.S.A.
102
Checking the HALL SENSOR
1.
Plug in washer, close door and press POWER
button, do not depress START.
2.
(Gray and White) 10 to 15Vdc.
Main Board: 1 to 2
Inline Connector: 1 to 4
Sensor: 4 to 5
3.
(Gray to Blue) rotate basket, pulsing 10Vdc.
Main Board: 2 to 4
Inline Connector: 1 to 2
Sensor: 1 to 4
4.
(Gray to Red) rotate basket , pulsing 10Vdc.
Main Board: 2 to 3
Inline Connector: 1 to 3
Sensor: 2 to 4
or
White to Red 8-12KΩ
White to Blue 8-12KΩ
103