Miele W 4840 Descriptive Technical Documentation

Hide thumbs Also See for W 4840:

Operating and installation instructions (60 pages)

Technical information (90 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

page of 108

/ 108
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Descriptive Technical

Documentation

- Model-dependent -

DTD no. 11-4800

Model(s): W 4840, W 4800

22.12.2006, US_am

Table of Contents

Summary of Contents for Miele W 4840

Page 1 Descriptive Technical Documentation - Model-dependent - DTD no. 11-4800 Model(s): W 4840, W 4800 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 6 ..........Work on the electronic of the frequency converter (ELP) ..090-3 This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 7 After work has been completed, as a matter of standard practice, a visual as well as an operational check should be performed. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 8 2 minutes. Work on the power electronic (ELP) may only be started after it has been established that the capacitor has been safely discharged. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 9 Components may have sharp edges as an outcome of production. Wear protective gloves and use edge shields (M. no. 05057680) to prevent cuts by sharp-edged components. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 10 Note Touch current measurement should be carried out on the following accessible conductive parts: Door ring. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 11 Descriptive Technical Documentation DTD no. 11-4800 Modification History When? Who? What? TT.MM.20XX Olaf Meyer zu Drewer Creation Version 1 Series start week 34/2006. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 13 USA: 120 V AC, 60 Hz, 15 A PC interface optical W-LAN interface (IEEE802.11), optional, accessory miele@home Table 1: Technical data Large capacity domestic washer front loader (LC HH-WA-FR) 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 15 Descriptive Technical Documentation DTD no. 11-4800 Layout of Electrical Components Fascia Variations/Optical PC interface Layout 1 1 (PC-LED) Optical PC interface 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 16 13 (H3/6) Drum light 14 (R1) Heater 15 (R30) Temperature sensor heater 16 (M5) Motor drum drive 17 (M8) Motor drain pump (suds pump) This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 17: Housing, Lid, Secure Transport
Descriptive Technical Documentation DTD no. 11-4800 010-1 Housing, Lid, Secure Transport 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 18: Technical Data
Descriptive Technical Documentation 010-2 DTD no. 11-4800 Technical Data Design Frame construction Table 1: Technical data Housing, Lid, Secure Transport This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 19: Fault Repair
When setting up on a stand on site, secure the appliance with clamps to keep it from slipping off. Cause The washer is not installed level. Remedy A Level the washer, adjust feet and counter-lock. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 20: Service
A Push the raised head screws in. A Lift the lid at the front, push it toward the back to release it from its retainers and remove. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 21: Front Panel Remove
A Tilt the front panel forward at the top and lift it off. A Installation: Hook the manual release latch into the detergent drawer. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 22: Float Switch (B8)
In the power electronic, there is no galvanic isolation from the power supply. When working on a washer connected to the power supply, be aware of the risk of mains potential on low-voltage components. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 23: Door, Magnet, Lock
Descriptive Technical Documentation DTD no. 11-4800 020-1 Door, Magnet, Lock 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 24: Technical Data
Porthole To run the appliance in the service department programming/service mode, with the front panel removed Table 1: Door, Magnet, Lock Special tools This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 25: Function
Water level < 80 mmWS, registered by analog pressure sensor (ADS), Suds temperature < 131°F (55°C), registered by suds temperature sensor (NTC resistor R30). 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 26: Fault Repair
A Open the door lock (A2) manually, refer to Door lock (A2) Open manually, 020 4.1. A Check the function of the door lock (A2). This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 27: Service
Fig. 1 A With the front panel in place, the door lock (A2) and the door seal fitted, press the door locking mechanism open. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 28: Door Lock (A2) Remove
A Remove the front panel, refer to Front panel Remove, 010 4.2. Fig. 2 A Lift the door lock (A2) and remove. A Pull the plug off. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 29: Door Porthole, Door Latch And Hinge Remove
Do not damage the porthole ring when removing the plugs. A Use a pointed tool to remove the plugs on the porthole ring. A Remove the retaining screws. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 31: Suds Container, Drum, Bearing, Heater Element
Descriptive Technical Documentation DTD no. 11-4800 030-1 Suds container, Drum, Bearing, Heater element 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 32: Technical Data
5.42 4.52 3.78 3.19 2.70 2.29 1.96 1.68 1.45 1.25 1.15 1.09 1.06 Table 2: Suds temperature sensor (R30) - Resistance values (NTC) This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 33: Function
RPMs are reduced, or the spin cycle is stopped, an additional rinse cycle is carried out if the spin cycle did not go for at least 60 seconds at 700 RPM. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 34: Light In The Door Concertina Seal
, the heater element is equipped with an integrated thermal cut-out. If the thermal cut-out trips, the heater element is destroyed. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 35: Service
A Pull the nozzle from the connecting hose, press the nozzle out of the sealing ring. A Installation: Door sealing ring marker at 9 o'clock. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 37: Water Intake
Descriptive Technical Documentation DTD no. 11-4800 040-1 Water intake 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 38: Technical Data
USA: Hot water connection: Solenoid valve with Y- connecting hose to volume counter / Flow meter (B3/4) Water control system (WCS) or Waterproof (WPS) Table 1: Technical data water intake This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 39: Function
Wash duration (incl. correction of residual time), Number of additional heating cycles, Number of rinses, Water level in the rinse cycles, Rinse duration, Final spin speed. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 40: Water Intake Monitoring Water Control System (Wcs)
The analog pressure sensor (ADS) monitors the function of the flow meter. During a malfunction or total failure of the flow meter, the water intake is controlled via level-controlled fill. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 41: Water Path Control Unit, Motor Water Path Control Unit (M24)
Activation by electrical motor. Measurements are taken via a slip contact in the water path control unit. Water path control unit with an additional fifth position for bleach. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 42: Service
In the power electronic, there is no galvanic isolation from the power supply. When working on a washer connected to the power supply, be aware of the risk of mains potential on low-voltage components. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 43: Water Drain
Descriptive Technical Documentation DTD no. 11-4800 050-1 Water drain 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 44: Technical Data
Drain pump Synchronized pump/motorized drain pump (M8) Max. head height 3', max. drain hose length 16' 5 Table 1: Technical data Water intake This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 45: Function
2 wc after 150 seconds; if the level has not dropped accordingly, the program is stopped, and the fault message water drain fault is displayed. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 48 (ELP). Table 1: Technical data Drive Special tool Mxt 40 Assembly lever for toothed V-belt M. no. 05057690 Table 2: Drive special tools This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 49: Spin Lock
When the switching contact is open, the power electronic (ELP) switches the motor off. When the temperature drops to a normal level, the contact closes again. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 50: Tachogenerator
The power electronic (ELP) calculates a spin speed signal from the AC frequency. Fault code, refer to F 53 Speed meter (tachogenerator), 070 3.31. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 51: Fault Repair
060-5 Fault Repair Drum drive defective Cause Defective drive Check drive A Check drive MXT 40, refer to Drive MXT 40, 060 4.3 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 52: Service
When working on a washer connected to the power supply, be aware of the risk of mains potential on low-voltage components. Toothed V-belt Mount Fig. 1: Mount the front loader toothed V-belt This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 53: Drive Mxt 40
Approx. 1-3 V. Check the tachogenerator for short circuit against the motor chassis. Check that the magnet is fastened to the motor shaft. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 55: Fascia Panel, Control Electronic
Descriptive Technical Documentation DTD no. 11-4800 070-1 Fascia panel, Control electronic 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 56: Technical Data
Imbalance sensor RPM imbalance sensor EU: Imbalance sensor or optional path sensor (Load sensor, B1/15) Table 1: Technical data Fascia panel, Control electronic This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 57: Function
Action after a power failure The appliance automatically continues the program at the exact point where it stopped when the power cut out. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 58: Programming Function (Hy Iv E)
The active language is used for the operating, programming and service modes. 2.3.7 Contrast The contrast of the display can be adjusted to suit the existing lighting conditions. Set display, refer to Display. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 59: Standby
If the flow pressure is lower than 1 bar, the water intake monitor water control system (WCS) registers this as a fault, refer to 040 2.4 Water intake monitoring water control system (WCS). 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 60: Allergy
Optional, integrated into the water path control, refer to 040 2.6 Flow meter (B3/4). 2.3.22 Keypad tone To activate the keypad tone acknowledgment. 2.3.23 Reset All programming options are reset to delivery status. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 61: Imbalance Sensor
Fascia panel with/without 7 segment display. 2.3.27 Appliance The features required to control and monitor the housing lid, lid II and positioning are deactivated. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 62: Load Indication
After a certain number, the prompt appears to run a program at a target temperature of 140°F (60°C). After the wash program at 140°F, the counter resets to 0. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 63: Prewash At Heavy Soil
Check the function visually, acoustically, and by observing the display. So that all operating functions can be checked, change test conditions manually, for example by pressing keypads. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 64: Demo Mode
If the communication between the power electronic (ELP) and the control electronic (EW) is defective, the EW sends the message independently that a fault has occurred. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 65: Fault Repair
Technical fault Remedy A In service mode, read the fault code, refer to Service mode Overview, 070 4.5, Service Mode Overview, 070 4.6. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 66: Sevensegment Display
A Press keypad 6 Prewash, the display shows the program release. Note The control dial has to be positioned at the locked program. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 67: Display Indicates: Appliance Is Locked
Defective drainage. Remedy A Check the drain pump (M8) and drain. Cause Defective water level sensing. Remedy A Check the analog pressure sensor (ADS). 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 68: Display Indicates: Locked, Enter Code
Remedy A To deactivate the demo mode, refer to Demo mode activate / deactivate, 070 4.3, Demo mode activate / deactivate, 070 4.4. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 69: Display Indicates: Waterproof, Shut Off Faucet
A Locate the leak and fix it. Display indicates: Water drain fault, check drain Cause Water drain is insufficient. Remedy A refer to F 11 Water drain, 070 3.15 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 70: Display Indicates: Technical Fault
(EW). 3.11 F 0 No fault Cause No fault is saved to the power electronic (ELP). Remedy A No action needed. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 71: F 1 Ntc Short Circuit Water / Heater
A Check the temperature sensor (NTC) circuit for short circuit, open circuit and isolation. A Check the electronic resistance of temperature sensor (NTC resistor R30), refer to 030 Table 2. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 72: F 10 Water Intake Fault Cold Water
A Locate the leak and fix it. Cause The water faucet is closed. Remedy A Open the faucet. Cause Water intake filters are gunked up. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 73 Hot water: Defective water intake valve (Y12) / water intake hose valve (WPS) hot water (2Y40). Remedy A Check valve Y12 / 2/Y40. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 74: F 11 Water Drain
(WCS). Cause Hot water faucet is closed. Remedy A Open the hot water faucet. Cause Water intake filters are gunked up. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 75: F 16 Oversudsing
The spin speed is reduced, or the spin cycle is stopped. An additional rinse cycle is carried out. Foam sensing, refer to 030 2.1 Foam sensing. Cause Oversudsing due to excess detergent usage. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 76: F 19 Flow Meter Is Sluggish (Flow Meter (B3/4) / Current Volume Meter)
A Correct the water intake fault. Refer to F 10 Water intake fault cold water, 070 3.14. Cause No, or too few, impulses from the reed float of the flow through meter (B3/4). This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 77: F 20 Heater (R1)
The target temperature is not reached before the thermo stop time. The heater (R1) is defective. Check the heater A Check the heater element for short circuit, open circuit and isolation. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 78: F 34 Door Does Not Lock
The door lock (A2) is defective. Remedy A Check the door lock (A2) contacts L / L', N / N'. A Check the door lock (A2) wiring harness. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 79: F 35 Door Does Not Release
A Check the door lock (A2) wiring harness. 3.22 F 39 Electronic fault (BAE) Cause Control electronic (EW) Remedy A Replace the control electronic (EW). 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 80: F 41 Electronic Fault (Faulty Eeprom / Faulty Data)
Remedy A Refer to the M. No. and check if the correct control electronic (EW) and the correct power electronic (ELP) are installed. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 81: F 44 Electronic Fault (Defective Connection I 2 C-Bus)
(ELP) are installed. A With the program function, reset all to the Delivery status. Then program all necessary settings. A Replace the power electronic (ELP). 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 82: F 46 Display
The program is stopped, the water intake valve is closed, and the drain pump is switched on for 120 seconds. Cause Defective interface of EW/ELP. Remedy A Check the wiring harness/connection EW/ELP. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 83: F 50 Drive
The pressure sensor is integrated into the power electronic (ELP). Remedy A Check the pressure sensor, refer to Service mode Overview, 070 4.5, Service Mode Overview, 070 4.6. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 84: F 53 Speed Meter (Tachogenerator)
Remedy A Check the drive, refer to Drum drive defective, 060 3.1. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 85: F 56 No Spin Action
The water intake can only proceed if a valid water path position is registered. Check the water path system A Check the water path system for short circuit, open circuit and isolation. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 86: F 92 Bacterial Control
Remedy A Load automatic function, refer to 040 2.3 Automatic load control / Intelligent water intake (IWE). This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 87: Maximum Spin Speed Is Not Reached
A In the program function water plus set the option to water+. Cause Child safety sensor Remedy A Child safety sensor, refer to 070 2.1 Child safety sensor. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 88: Service
The keypads below the display activate the menu options. Note Keypad: The function of each pad depends on the menu and is indicated in the display. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 89 070 2.3.4 Memory on: Memory function active Appliance without drum light: off Drum light refer to 070 2.3.29 Drum light Appliance with drum light: on 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 90 Machine refer to 070 2.3.27 Appliance Top loader Speed sensor (Tachogenerator) Imbalance sensor refer to 070 2.3.24 Tacho & Imbalance sensor Imbalance sensor Tacho & Load sensor This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 91: Programming Overview
(5 Hz). Acknowledgement indicator Start LED flashes rapidly (5 Hz). If access is not successful, the control reverts automatically to select program . 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 92 Fascia panel without buzzer pad: off Buzzer refer to 070 2.3.5 With buzzer pad: Volume Buzzer represented in bars. Delivery status: 3 bars. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 93 (Tachogenerator) USA: Water path control with 5 positions Water valves refer to 070 Valves 2.3.25 Water valves Water path control with 4 positions 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 94 Table 3: Programming mode overview Save and quit Note The indicated programming options are saved in the power electronic (ELP). A Open the door. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 95: Demo Mode Activate / Deactivate
A Program simulation / Interactive demo mode: In the demo mode, the appliance can be operated, without a program being started. Save and quit A To deactivate the demo program, repeat the access procedure. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 96 A Operating simulation / Interactive demo mode: In the demo mode, the appliance can be operated, without a program being started. Save and quit A To deactivate the demo program, repeat the access procedure. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 97: Service Mode Overview
A To start a service function: Press the right pad (OK) below the display. A To continue in service functions: Press the left pad below the display. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 98 F 63 Water path control fault, 070 3.33 Bacterial control F 92 F 92 Bacterial control, 070 3.34 Delete fault memory This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 99 Delete fault memory: Select option Delete fault memory and press the right pad (OK) below the display. Quit (without saving) Note Delete the fault memory before ending. A Select service function Exit and confirm. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 100 A Actual: Buzzer LED flashes 3x: Component test. However, 9=buzzer on, 10= LED test. Note The component test switches off automatically 30 minutes after the last component is activated. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 101 F 63, Water path control, refer to F 63 Water path control fault, 070 3.33 F 92, Bacterial control, refer to F 92 Bacterial control, 070 3.34 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 102 The component test switches off automatically 30 minutes after the last component is activated. To select a sensor and start the check: Press Start. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 103: Control Electronic (Ew) And Fascia Support Panel Remove
A Remove the fascia panel. A Remove the retaining screws of the control electronic (EW), press in on the snap rod and remove the electronic. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 104 A Take out the detergent compartment drawer. A Remove the retaining screws of the fascia support panel. A Lift the fascia support panel and remove. This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 105: Electrical System
Descriptive Technical Documentation DTD no. 11-4800 090-1 Electrical System 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Page 106: Technical Data
Fine-wire fuse (F7) on power 5 mm * 200 mm, 6.3 A slow-blow (F2) Fuses electronic (ELP) Table 1: Technical data Electrical System This information should not be duplicated or passed on without Miele approval. All rights reserved. 22.12.2006, US_am...
Page 107: Service
2 minutes. Before starting work on the electronic of the frequency converter drive (ELP), make sure that the capacitor has been safely discharged. 22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.

This manual is also suitable for:

W 4800

Miele W 4840 Descriptive Technical Documentation

Quick Links

Related Manuals for Miele W 4840

Summary of Contents for Miele W 4840

This manual is also suitable for:

Table of Contents