Table of Contents
Advertisement
USE AND INSTALLATION MANUAL
4.1.3. SERVICE INDICATIONS DISPLAY
The current time and cubic metres
available before the supply runs out are
displayed alternately.
The tap symbol is displayed, indicating that
water is being supplied to the service
This indicates that a total reset of the softener has occurred and reprogramming is required.
(Contact the technical support service)
It indicates a supply interruption and requires the
current time to be reprogrammed (see 4.6, point
2).
In this condition, the softener cannot generate
softened water.
Run an extra regeneration at the end, see point
4.4.2.
Brief interruptions to the power supply are not
normally shown because they are managed by
the back-up battery
33
Advertisement
Table of Contents
