1MRK500128-UEN Rev. H
GUID-6FC25881-990D-4288-8206-7F807044F572 V2 EN-US
Figure 35:
7.1.2
Measured and calculated values
All values show the momentary measurement value and some include demand values calculated
from a set period.
7.1.2.1
Measured values
Measured values can be accessed through the LHMI.
7.1.2.2
Using the local HMI for monitoring
1.
Select Main menu /Measurements to monitor measured and calculated values.
The list of IED's basic measurements is shown.
2.
Scroll the view with
7.1.3
Recorded data
The IED is provided with intelligent and flexible functionality that collects different kinds of data. The
recorded data gives substantial information for post fault analysis.
•
Disturbance records
•
Events
650 series
Operation manual
Fault indication
The internal event list is not updated dynamically. To update the list, leave the Internal
events menu and then select it again.
If the LHMI displays --- instead of a measured float value, it means that the value is
invalid and out of range
and
.
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC13000247-1-en.vsd
Section 7
Operating procedures
GUID-4C43C62F-D641-4880-8067-B9D9C8EE25BA v7
AMU0600431 v6
AMU0600432 v7
GUID-1E9CFEC1-6245-4612-B637-821951B95D60 v7
53