Mounting On A Wall (Optional); Vesa Grid; Battery Installation And Removal Method (Optional)- For Service Personnel Only - Philips 4000 Series User Manual

25BDL4050I
1.4.

Mounting on a Wall (Optional)

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting
interface that complied with TUV-GS and /or UL1678 standard in North America.
1. Prepare a flat and horizontal surface that is larger than the display and spread a thick protective sheet on it to facilitate your operation
without scratching the screen.
2. Ensure you have all accessories for all types of mounting (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result in damage to the
equipment, or injury to the user or installer. The product warranty does not cover the damage caused by improper installation.
4. For the wall-mounting kit, use the M4 mounting screws (with a length 12 mm longer than the thickness of the mounting bracket) and tighten
them securely.

1.4.1. VESA Grid

100(H) x 100(V) mm (M4 mounting screws with a length 12 mm longer than the thickness of the mounting bracket)
Caution:
To prevent the display from falling:
• For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially available. For detailed
instructions about the installation, refer to the guide provided with the bracket.
• To prevent the display from falling in case of earthquake or other natural disaster, please consult the manufacturer of the bracket for the
mounting location.

1.4.2. Battery installation and removal method (optional)- For service personnel only

1) Remove the battery cover.
2) Pay attention to the direction of the battery panel, and install or remove the battery.
Warning:
1) The batteries are intended to be replaced or charged only by authorized service personnel (for example, the manufacturer or personnel
authorized by the manufacturer).
2) The battery compartment is not intended to be user accessible.
Battery compartment is only accessible with a tool.
3) Users cannot replace the battery.
4) Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery
in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a
battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Install or remove the
battery from here.
2
Unboxing