Table of Contents
Advertisement
Program 801 - Drawer Assignment
Program 810 - Clerk Descriptor Programming
144 • P-Mode Programming
1.
Turn the control lock to the P position.
2.
To begin the program, enter 8 0 1, press the SBTL key.
8
0
1
3.
Enter the number (1-10) of the clerk you wish to program; press the X/TIME key.
X/TIME
4.
Enter a drawer assignment (0 (no drawer), 1 (default), or 2); press the SBTL key.
Enter 0, 1 or 2
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
CASH
1.
Turn the control lock to the P position.
2.
To begin the program, enter 8 1 0, press the SBTL key.
8
1
0
3.
Enter the number (1-10) of the clerk you wish to program; press the X/TIME key.
X/TIME
4.
Enter up to 12 three-character codes and press the X/TIME key. (See "Descriptor Code
Chart" on page 101.)
Enter up to 12 three-
character codes
5.
Press the CASH key to finalize the program.
CASH
SBTL
SBTL
SBTL
SBTL
ER 5215 Electronic Cash Register
Advertisement
Table of Contents
