Motorola APX 7000 User Manual page 79

Radio Indications of Lost Bluetooth Connection
The radio shows
connection. Below is the scenario and radio
indications when the connection is interrupted.
The starts blinking for up to 10 seconds. You hear
a decremental-pitched tone. The display shows
<Device Type> alternating with CON LOST.
If the Bluetooth device successfully re-connects
before the Bluetooth Drop Timer expires, the display
shows momentary <Device Type> CONNCTED, and
shows persistently, or if the Bluetooth device fails
to re-connect within 10 seconds, the blinking
replaced by a persistent
Standard Pairing Feature
Note:
Bluetooth tones, Bluetooth menu and
preprogrammed buttons must be
preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
when the device has a Bluetooth
.
Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
life of the accessory is aligned with the Talk
time power consumption, not the Standby time
consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable device. Once the device is
discovered, your radio automatically pairs with the
device.
This feature also enables your Bluetooth enabled
radio to be visible to another Bluetooth enabled
device and receive request to pair from other device.
Searching and Pairing the Bluetooth Device
is
Ensure the Bluetooth on your device is turned on and
is set to Discoverable in order to enable your radio to
detect your device in Bluetooth.
Bluetooth Search in Bluetooth Standard Pairing
method is used to scan for other Bluetooth devices
nearby. It is set to off by default.
The radio only search for HSP devices and Motorola
MCW & OCW accessories. Radio filters out other
profiles.
75
English