Table of Contents
Advertisement
Electrical connection
7.1.2
Pressure X2
Pressure output
7-4
PST 6101.321 / PSI 6101.321
For cable type and maximum cable length, please refer to the Table "Cables", see sec-
tion 5.
The connection between PSI 6101.321 / PST 6101.321 and the pressure control valve
consists of a shielded cable. The shield is connected to X2/5 and the shield ground at the
pressure control valve.
Depending on the programming and timer type used, an output signal is provided at the
pressure output if the program number has been selected:
-
analog pressure output, voltage from 0 V to +10 VDC, max. 20 mA
The pressure output is immediately driven when the program has been selected exter-
nally.
1070 080 056-101 (99.09) GB
Advertisement
Table of Contents
