Testing Fall Alert; Exiting Fall Alert; Reinitiating Fall Alert; Automatic Registration Service - Motorola APX 6000 User Manual

Hide thumbs Also See for APX 6000:
Table of Contents

Advertisement

Fall Alert Enhanced
Your radio also supports Fall Alert Enhanced where an alert tone is played for a programmed period.
This tone is louder than the programmed minimum level or the current level of the speaker. This tone
acts as a beacon to help find the radio.
NOTE: The radio plays this alert tone even in Surveillance Mode.
When the alert tone is active, changing to another channel with a different setup triggers a different
response from the radio:
The alert tone is inhibited when you change to a channel without Emergency feature.
The alert tone is inhibited when you change to a channel with Emergency but no Fall Alert feature.
The current alert tone is inhibited and is replaced with a different alert tone when you change to a
channel with Emergency feature and a different Fall Alert configuration.
The alert tone continues when you change to a channel with Emergency and similar Fall Alert
configuration.
7.15.2

Testing Fall Alert

Prerequisites: Ensure that Fall Alert feature is configured in your radio.
Procedure:
1 Turn on the radio, and place it in a vertical position for at least 5 seconds.
2 Lay the radio down in a horizontal position.
The radio plays an alert tone and the display shows Man-Down.
Postrequisites: If Fall Alert is configured but the condition does not trigger the activation of the
feature, send the radio to a qualified technician.
7.15.3

Exiting Fall Alert

Procedure:
To exit Fall Alert mode, press Clr.
7.15.4

Reinitiating Fall Alert

Procedure:
To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions:
Return the radio to a vertical position.
If motion sensitivity is enabled, shake the radio.
7.16

Automatic Registration Service

Automatic Registration Service (ARS) provides an automated data application registration for your
radio. When you turn on the radio, the device automatically registers with the server. Data applications
68012001079-JW
Chapter 7 : Advanced Features
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000li6000li3.5

Table of Contents